[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[
List Home]
Re: [leshan-dev] A question regarding Leshan demo web site
|
As you are here Achim, I will not open a dedicated issue
in californium.
Let discuss about it here.
My first point : I'm not sure this is a good idea to change
default behavior in a minor version release. In this particular
case we could maybe considered this as a bug fix (But I'm not sure
of this as this is just a SHOULD and not a MUST).
My second point : About the RFC, it says :
-
TLS 1.2 server implementations SHOULD use DTLS
version 1.0 regardless of the version of TLS that is expected to be
negotiated. DTLS 1.2 and 1.0 clients MUST use the version solely to
indicate packet formatting (which is the same in both DTLS 1.2 and
1.0) and not as part of version negotiation. In particular, DTLS 1.2
clients MUST NOT assume that because the server uses version 1.0 in
the HelloVerifyRequest that the server is not DTLS 1.2 or that it
will eventually negotiate DTLS 1.0 rather than DTLS 1.2.
-
The server MUST use the same
version number in the HelloVerifyRequest that it would use when
sending a ServerHello.
So I'm not sure to understand this correctly ?
Does it means that a DTLS 1.2 server SHOULD use 1.2 version in
hello_verfiy_request ? Using 1.0 version is only for server which
support 1.0 to 1.2 ?
(I suppose you have another understanding else you didn't
implement this ? or maybe you just missed the second sentence ?)
Mark, no matter how this discussion
will end, your device seems to not respect this part of the RFC :
In particular, DTLS 1.2
clients MUST NOT assume that because the server uses version 1.0 in
the HelloVerifyRequest that the server is not DTLS 1.2 or that it
will eventually negotiate DTLS 1.0 rather than DTLS 1.2.
So you should report this.
Simon
Le 23/11/2020 à 16:48, Kraus Achim
(IOC/PAP-HU) a écrit :
Hi
together,
there
is a
DtlsConfiguration.Builder.setProtocolVersionForHelloVerifyRequests.
That
may help out.
It’s
always not too easy, to fix something according a RFC, if
some implementations are used to behave different ;-).
Mit
freundlichen Grüßen / Best regards
Achim Kraus
Bosch IoT Hub - Product Area IoT Platform (IOC/PAP-HU)
Bosch.IO GmbH | Stuttgarter Straße 130 | 71332 Waiblingen |
GERMANY | www.bosch.io
Sitz: Berlin, Registergericht: Amtsgericht Charlottenburg;
HRB 148411 B
Aufsichtsratsvorsitzender: Dr.-Ing. Thorsten Lücke;
Geschäftsführung: Dr. Stefan Ferber, Dr. Aleksandar
Mitrovic, Yvonne Reckling
I bet this could be because of :
https://github.com/eclipse/californium/pull/1397
See :
https://tools.ietf.org/html/rfc6347#section-4.2.1
The default VERSION value changes which change default
behavior, but this changes follow a RFC recommendation so I'm
not sure if this will(or even should) be changed back ? (My
guess is probably not)
This is possible to change it using the API, see :
https://github.com/eclipse/californium/pull/1397/files#diff-3c57eeacb63a45e50c11737e09d3e166367773a093f2cb216e3ece81f2477597R1606
(but this will probably not changed on the sandbox)
Le 23/11/2020 à 16:17, Simon Bernard a
écrit :
We succeed to get a capture. I joined it.
Your device sounds to not answer to HELLO_VERIFY_REQUEST
from the server.
I guess there is some changes about this at Californium
side. I will open a ticket to discuss about this. Please do
not hesitate to join the discussion.
Le 23/11/2020 à 15:36, Simon Bernard a
écrit :
Hi,
You can eventually run leshan-server-demo locally and so
run wireshark at server side.
Or Eventually, I can try to do a capture at server side.
(as there is not so much traffic) I'm currently running a
tcpdump on the sandbox. If you make your device
communicate now I can see the exchange.
(This will maybe be complicated to synchronize ourself, I
will let the tcpdump capturing for the next hour but I
will stop it before the end of the day)
Simon
Le 23/11/2020 à 15:00, Mark Lugovskoy
a écrit :
Hi,
I
tried to connect using this sequence of commands
from GSM modem:
AT#LWM2MINJKEYS=0,1,"mark123456","mark123456","0987654321"
AT#LWM2MSTS=0,999,"coaps://leshan.eclipseprojects.io:5784",1
at#reboot
AT#LWM2MENA=1
With this sequence, I managed to connect
until Thursday after noon. In the evening I already
couldn’t connect.
I pretty much use my GSM modem as black
box, so I can’t provide much more details. I also
don’t have Wireshark.
I’ll try to find more information that you
asked.
Thank you,
Mark
From:
Thomas LE ROUX [mailto:thomas.leroux@xxxxxxxx]
Sent: Monday, November 23, 2020 3:33 PM
To: leshan developer discussions <leshan-dev@xxxxxxxxxxx>
Cc: Mark Lugovskoy <mark.lugovskoy-ext@xxxxxxx>
Subject: Re: [leshan-dev] A question
regarding Leshan demo web site
There must be something wrong
with either your computer's networking options,
the sequence of command you used, registration to
the server (wrong key, or a device with the same
identity is registered with a wrong key. You can
check this out at
https://leshan.eclipseprojects.io/#/security)
or something else.
Hi,
Is
there some problem with this server?
It should not. But you
maybe found a bug ?
Thursday I integrated in master (and so
applied on Leshan sandbox) some commits about
integration of the new Californium version,
there is maybe a regression with this.
(Californium itself or my modifications)
This could help if you provide more context.
(which client used ? DTLS or not ?, if DTLS, rpk
psk or x509 ? providing wireshark capture or
log could help too)
If you prefer you can use github issue ?
(Mailing list is fine too)
Simon
Le 23/11/2020 à 13:17, Mark
Lugovskoy a écrit :
Hi,
Last
week I connected with my device successfully
to the demo LESHAN server:
https://leshan.eclipseprojects.io/#/clients.
But
since Thursday I can’t connect to it, with
the same sequence of commands that I used
before.
Is
there some problem with this server?
Thank
you,
Mark
_______________________________________________
leshan-dev mailing list
leshan-dev@xxxxxxxxxxx
To unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/leshan-dev
_______________________________________________
leshan-dev mailing list
leshan-dev@xxxxxxxxxxx
To unsubscribe from this list, visit
https://www.eclipse.org/mailman/listinfo/leshan-dev
_______________________________________________
leshan-dev mailing list
leshan-dev@xxxxxxxxxxx
To unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/leshan-dev
_______________________________________________
leshan-dev mailing list
leshan-dev@xxxxxxxxxxx
To unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/leshan-dev