Re: [ecf-dev] Troubles with Datashare over XMPP

[Scott Lewis <slewis@xxxxxxxxxxxxx>]

Hi Pavel,

Great to hear things are working properly for you!

BTW, just so you are aware...it is possible to *specify* a resource 
identifier (rather than have one chosen/created for you)...e.g. when the 
containers connect to their respective accounts...e.g.

IContainer xmppClientContainer = ...<create xmpp container instance>
// Note the ecf.myresourceid in following code
ID targetID = 
IDFactory.getDefault().createID(namespace,"xmpps://username@xxxxxxxx/ecf.myresourceid");
xmppClientContainer.connect(targetID,connectContext);

This is just FYI.  It doesn't have to be used.  Note that if you *do* 
specify the resource ID, that it should be globally unique (otherwise 
client name conflicts could occur).

Thanks for your persistence on this issue.  I'm very glad things 
are/will work for you.  If you get an opportunity to blog about your 
usage/app/use case for datashare-over-xmpp please do so...and if you 
wish to go even further then a wiki page would be great also.  And/or a 
note to this mailing list would also be great.  It would also be great 
to document the issues with gmail (and probably other xmpp 
servers)...i.e. WRT the need for adding accounts to rosters/contacts 
list, etc.

Thanks,

Scott



Samolisov Pavel wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Thanks, Scott!
>
> It fork fine for me! Yes! If I send message to jabber id/resource - this
>  is sended and receive correctly.
>
> As it has turned out, I have two running jabber-clients, and gmail can't
> chose right resource id.
>
> I have tried with accounts on different servers (ya.ru and gmail.com).
> It also works fine.
>
>
> Scott Lewis пишет:
>   
> > Hi Pavel,
> >
> >
> > Samolisov Pavel wrote:
> > Scott, I add my accounts to their rosters (samolisov@xxxxxxxxx to
> > pavel.samolisov@xxxxxxxxx and pavel.samolisov@xxxxxxxxx to
> > samolisov@xxxxxxxxx). But it does not help me.
> >
> > Your error message has 500 error code and error string:
> > <error code="503" type="cancel"> but I have this error string:
> > <error code="400">
> >
> > May be this error means not correct jid? 
> >
> >
> >     
> > > That is possible, although I am not sure about the meaning of these
> > > error codes for the gmail service.  It may/probably is specified in the
> > > xmpp specs, but I haven't looked yet.
> > >       
> > In my message xml:
> > to="samolisov@xxxxxxxxx/", in your message:
> > to="scottslewis@xxxxxxxxx/ecf.paluIbE9F19E8B"
> >
> > May be I should run/close another jabber client?
> >   
> >
> >     
> > > I think what you should do is use the fully qualified ID...i.e.
> > > including the resource identifier (i.e. .../ecf.paluIbE9F19E8B).  It
> > > may/could be that the gmail xmpp server requires the fully qualified jid
> > > in order to avoid 400.  Note that once the accounts are in each other's
> > > rosters, you can get the fully qualified ID from the roster.
> > > Also, I modified the test code to use the fully qualified ID so you
> > > can/could also try that (please) with your accounts.
> > >       
> > > Thanks,
> > >       
> > > Scott
> > >       
> >
> > Scott Lewis ?8H5B:
> >  
> >     
> > > > > Pavel,
> > > > >
> > > > > I got the error message below using two gmail accounts (is this what you
> > > > > are seeing also)?.  It seems to indicate that gmail is refusing to send
> > > > > the message.
> > > > >
> > > > > However, when I added the contacts to each other's contact list/roster,
> > > > > the messages were delivered (see below), and I did not see the error
> > > > > message.  It could be that gmail has a policy of limiting delivery of
> > > > > certain messages (e.g. those that are just message properties?) when the
> > > > > sender/receiver are not on each other's roster.
> > > > >
> > > > > Also, it may be necessary to use the fully qualified XMPPID (i.e. that
> > > > > includes the resource).  Would you please try the ChannelTest again
> > > > > after adding having your two gmail accounts add each other to their
> > > > > rosters?
> > > > >
> > > > > Thanks,
> > > > >
> > > > > Scott
> > > > >
> > > > > Here's the error response I get
> > > > >
> > > > > <message id="T7ATS-23" to="scottslewis@xxxxxxxxx/ecf.paluIbE9F19E8B"
> > > > > type="error"
> > > > > from="rcraftlewis@xxxxxxxxx/ecf.WzWjMhmXtt6dtH2pGPwz7pCq+sU="><thread>TR03n0</thread><properties
> > > > >
> > > > > xmlns="http://www.jivesoftware.com/xmlns/xmpp/properties";><property><name>org.eclipse.ecf.internal.provider.xmpp.smack.ECFConnection.object</name><value
> > > > >
> > > > > type="java-object">
> > > > > 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
> > > > >           
> Gl0
>   
> > > > >     
> > > > >           
> > 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
> >     
> </
>   
> > value></property></properties><nos:x
> >  
> >     
> > > > > value="disabled" xmlns:nos="google:nosave"/><arc:record otr="false"
> > > > > xmlns:arc="http://jabber.org/protocol/archive"/><error code="503"
> > > > > type="cancel"><service-unavailable
> > > > > xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/></error></message>
> > > > >
> > > > > console output with additions to contacts/roster
> > > > >
> > > > > receivercontainerid=GUID[IKjPtojKTzqOGFvAUaBbVbZXkXc=];
> > > > > fromcontainerid=GUID[P0oT5XS22sgea3v9328oHCzJIqM=];
> > > > > channelid=StringID[channel]
> > > > >  
> > > > > event=ChannelMessageEvent[channelid=StringID[channel];fromid=GUID[P0oT5XS22sgea3v9328oHCzJIqM=];data=[B@5a5622]
> > > > >
> > > > >
> > > > >   message=hello
> > > > >
> > > > >
> > > > >
> > > > > Samolisov Pavel wrote:
> > > > > Hello Scott.
> > > > >
> > > > > I have tried Channel Test on my gmail accounts, but it does not work
> > > > > correctly.
> > > > >
> > > > > I got in the OSGi console:
> > > > >
> > > > > receivercontainerid=GUID[LFJWsv2VjBREyKuZONkNTMENAXo=];
> > > > > fromcontainerid=GUID[LFJWsv2VjBREyKuZONkNTMENAXo=];
> > > > > channelid=StringID[channel]
> > > > >
> > > > > event=ChannelMessageEvent[channelid=StringID[channel];fromid=GUID[LFJWsv2VjBREyKuZONkNTMENAXo=];data=[B@1cc2f42]
> > > > >
> > > > >
> > > > >    message=hello
> > > > >
> > > > > receivercontainerid=GUID[1miXQC+k9p01gzrzh+IpJurt+cc=];
> > > > > fromcontainerid=GUID[1miXQC+k9p01gzrzh+IpJurt+cc=];
> > > > > channelid=StringID[channel]
> > > > >
> > > > > event=ChannelMessageEvent[channelid=StringID[channel];fromid=GUID[1miXQC+k9p01gzrzh+IpJurt+cc=];data=[B@22d5b5]
> > > > >
> > > > >
> > > > >    message=hello
> > > > >
> > > > > i.e. receivercontainerid == fromcontainerid
> > > > >
> > > > > In debug window same error than I sent before. To my regret, Error
> > > > > message isn't included in XMPP message, only error code.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Scott Lewis ?8H5B:
> > > > >  
> > > > >    
> > > > >           
> > > > > > > > Hi Pavel,
> > > > > > > >
> > > > > > > > I think I may have this sorted out.
> > > > > > > >
> > > > > > > > So, first I created and released a new xmpp test:
> > > > > > > >
> > > > > > > > org.eclipse.ecf.tests.provider.xmpp.datashare.ChannelTest
> > > > > > > >
> > > > > > > > This test works properly with my two gmail accounts specified as
> > > > > > > > system
> > > > > > > > properties (e.g.)
> > > > > > > >
> > > > > > > > -Dusername0=user0@xxxxxxxxx -Dpassword0=pw0
> > > > > > > > -Dusername1=user1@xxxxxxxxx -Dpassword1=pw1
> > > > > > > > -Dsmack.debugEnabled=true
> > > > > > > >
> > > > > > > > I would appreciated it if you would try this test with your initial
> > > > > > > > accounts.
> > > > > > > >
> > > > > > > > In looking at your code, I think the problem is with this line:
> > > > > > > >
> > > > > > > > _container =
> > > > > > > > ContainerFactory.getDefault().createContainer(XMPP_CONTAINER,
> > > > > > > >                System.getProperty(XMPP_ACCOUNT_ID));
> > > > > > > >
> > > > > > > > It should rather be:
> > > > > > > >
> > > > > > > > _container =
> > > > > > > > ContainerFactory.getDefault().createContainer(XMPP_CONTAINER);
> > > > > > > >
> > > > > > > >
> > > > > > > > The reason for this is that the containerID (that's created for the
> > > > > > > > container via this factory method) is *not* intended to be the
> > > > > > > > same as
> > > > > > > > the account that is connected to (i.e. the 'targetID' passed into
> > > > > > > > container.connect(targetID, context)).
> > > > > > > >
> > > > > > > > In your createContainer call above, you specify the
> > > > > > > > XMPP_ACCOUNT_ID for
> > > > > > > > the containerID...and so that String is used for both the containerID
> > > > > > > > *and* for the targetID...i.e. what targetID the container connects
> > > > > > > > *to*.  These should never be the same, actually...as the containerID
> > > > > > > > should be unique relative to the server that it is connecting to
> > > > > > > > (represented by the connect targetID).  So in your case the
> > > > > > > > containerID
> > > > > > > > *is* the same as the connect targetID, and the message just gets
> > > > > > > > delivered *back* to the originator (and not sent onto the target).
> > > > > > > >
> > > > > > > > So, in short, if you change the createContainer call above to
> > > > > > > > create a
> > > > > > > > new ID for your client container, I suspect things will most probably
> > > > > > > > work for you.
> > > > > > > >
> > > > > > > > Please do let all know if this does/doesn't settle things for
> > > > > > > > you.  If
> > > > > > > > not and I'm wrong...then we'll try again.
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > >
> > > > > > > > Scott
> > > > > > > >
> > > > > > > >
> > > > > > > > Samolisov Pavel wrote:
> > > > > > > >
> > > > > > > > Scott, I create container by following code:
> > > > > > > >
> > > > > > > > _container =
> > > > > > > > ContainerFactory.getDefault().createContainer(XMPP_CONTAINER,
> > > > > > > >                 System.getProperty(XMPP_ACCOUNT_ID));
> > > > > > > >
> > > > > > > > but container hasn't readable ID.
> > > > > > > >
> > > > > > > > The message to="pavel.samolisov@xxxxxxxxx/"...is the message that I
> > > > > > > > sended.
> > > > > > > >
> > > > > > > > The message
> > > > > > > > <message id="9Q3m5-4" to="samolisov@xxxxxxxxx/ecf.samoliF3FE20D2"
> > > > > > > > from="pavel.samolisov@xxxxxxxxx/" type="error">
> > > > > > > >
> > > > > > > > is error message that I received and ChannelListener in my bundle
> > > > > > > > reacts
> > > > > > > > on this message.
> > > > > > > >
> > > > > > > > samolisov@xxxxxxxxx sends message to pavel.samolisov@xxxxxxxxx
> > > > > > > > samolisov@xxxxxxxxx receives message from pavel.samolisov@xxxxxxxxx
> > > > > > > > (error message but this message include sended data).
> > > > > > > > pavel.samolisov@xxxxxxxxx does not receive message that sended by
> > > > > > > > samolisov@xxxxxxxxx
> > > > > > > >
> > > > > > > > I do not send any others messages.
> > > > > > > >
> > > > > > > >
> > > > > > > > Scott Lewis ?8H5B:
> > > > > > > >  
> > > > > > > >             
> > > > > > > >                 
> > > > > > > > > > > Hi Pavel,
> > > > > > > > > > >
> > > > > > > > > > > Thanks for sticking with this...we'll track down the issue one
> > > > > > > > > > > way or
> > > > > > > > > > > another.
> > > > > > > > > > >
> > > > > > > > > > > Samolisov Pavel wrote:
> > > > > > > > > > >                            
> > > > > > > > > > >                       
> > > > > > > > > > > > Thanks for your help, Scott!
> > > > > > > > > > > >
> > > > > > > > > > > > I try it on gmail.com only.
> > > > > > > > > > > >
> > > > > > > > > > > > I send data from samolisov@xxxxxxxxx to pavel.samolisov@xxxxxxxxx
> > > > > > > > > > > > and
> > > > > > > > > > > > add -Dsmack.debugEnabled=true to my run configuration.
> > > > > > > > > > > >
> > > > > > > > > > > > But it does not work correct :-(
> > > > > > > > > > > >
> > > > > > > > > > > > I send data (over DataSharing API Channel) from
> > > > > > > > > > > > samolisov@xxxxxxxxx to
> > > > > > > > > > > > pavel.samolisov@xxxxxxxxx
> > > > > > > > > > > >
> > > > > > > > > > > > In Smack Debug Window I can see:
> > > > > > > > > > > >
> > > > > > > > > > > > <message id="9Q3m5-4" to="pavel.samolisov@xxxxxxxxx/"
> > > > > > > > > > > > type="chat">
> > > > > > > > > > > >   <thread>N4E940</thread>
> > > > > > > > > > > >   <properties
> > > > > > > > > > > > xmlns="http://www.jivesoftware.com/xmlns/xmpp/properties";>
> > > > > > > > > > > >     <property>
> > > > > > > > > > > > <name>org.eclipse.ecf.internal.provider.xmpp.smack.ECFConnection.object</name>
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >       <value
> > > > > > > > > > > > type="java-object">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
> > > > > > > > > > > >                         
> pdH
>   
> > > > > > > > > > > >                   
> > > > > > > > > > > >                         
> > kvT
> >  
> >     
> > > > > > > > > > > >                               
> > > > > > > > > > > >                         
> > > > > mFt
> > > > >  
> > > > >    
> > > > >           
> > > > > > > > > > > >                                     
> > > > > > > > > > > >                         
> > > > > > > > ZXN
> > > > > > > >  
> > > > > > > >             
> > > > > > > >                 
> > > > > > > > > > > > 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</value>
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >     </property>
> > > > > > > > > > > >   </properties>
> > > > > > > > > > > > </message>
> > > > > > > > > > > >
> > > > > > > > > > > > And not long after:
> > > > > > > > > > > >
> > > > > > > > > > > > <message id="9Q3m5-4" to="samolisov@xxxxxxxxx/ecf.samoliF3FE20D2"
> > > > > > > > > > > > from="pavel.samolisov@xxxxxxxxx/" type="error">
> > > > > > > > > > > >   <thread>N4E940</thread>
> > > > > > > > > > > >   <error code="400"/>
> > > > > > > > > > > >   <properties
> > > > > > > > > > > > xmlns="http://www.jivesoftware.com/xmlns/xmpp/properties";>
> > > > > > > > > > > >     <property>
> > > > > > > > > > > >
> > > > > > > > > > > > <name>org.eclipse.ecf.internal.provider.xmpp.smack.ECFConnection.object</name>
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >       <value
> > > > > > > > > > > > type="java-object">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
> > > > > > > > > > > >                         
> pdH
>   
> > > > > > > > > > > >                   
> > > > > > > > > > > >                         
> > kvT
> >  
> >     
> > > > > > > > > > > >                               
> > > > > > > > > > > >                         
> > > > > mFt
> > > > >  
> > > > >    
> > > > >           
> > > > > > > > > > > >                                     
> > > > > > > > > > > >                         
> > > > > > > > ZXN
> > > > > > > >  
> > > > > > > >             
> > > > > > > >                 
> > > > > > > > > > > > wYWNlO3hwc3IAOG9yZy5lY2xpcHNlLmVjZi5jb3JlLmlkZW50aXR5LlN0cmluZ0lEJFN0cmluZ0lETmFtZXNwYWNlbfiysG4/ewsCAAB4cgAnb3JnLmVjbGlwc2UuZWNmLmNvcmUuaWRlbnRpdHkuTmFtZXNwYWNlNzA4NTIyMTgCAARJAAhoYXNoQ29kZVoADWlzSW5pdGlhbGl6ZWRMAAtkZXNjcmlwdGlvbnEAfgAJTAAEbmFtZXEAfgAJeHDM7OAkAXQAElN0cmluZ0lEIE5hbWVzcGFjZXQAJm9yZy5lY2xpcHNlLmVjZi5jb3JlLmlkZW50aXR5LlN0cmluZ0lEdAAHY2hhbm5lbHNxAH4ACHEAfgAPdAATc2Ftb2xpc292QGdtYWlsLmNvbXNyAC1vcmcuZWNsaXBzZS5lY2YucHJvdmlkZXIueG1wcC5pZGVudGl0eS5YTVBQSUQtNDc3MjkxNAIABEkABHBvcnRMAAhob3N0bmFtZXEAfgAJTAAMcmVzb3VyY2VuYW1lcQB+AAlMAAh1c2VybmFtZXEAfgAJeHEAfgAKc3IANG9yZy5lY2xpcHNlLmVjZi5wcm92aWRlci54bXBwLmlkZW50aXR5LlhNUFBOYW1lc3BhY2UtNTYzMzk3NgIAAHhxAH4ADiGuWlsBdAAOWE1QUCBOYW1lc3BhY2V0AAhlY2YueG1wcP////90AAlnbWFpbC5jb21wdAAPcGF2ZWwuc2Ftb2xpc292</value>
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >     </property>
> > > > > > > > > > > >   </properties>
> > > > > > > > > > > > </message>
> > > > > > > > > > > >                                       
> > > > > > > > > > > >                         
> > > > > > > > > > > I just want to clarify...which containers (and their associated
> > > > > > > > > > > connections) are sending/receiving the above?
> > > > > > > > > > >
> > > > > > > > > > > It looks like the message sent is
> > > > > > > > > > > to="pavel.samolisov@xxxxxxxxx/"...is
> > > > > > > > > > > the following message (with
> > > > > > > > > > >
> > > > > > > > > > > to="samolisov@xxxxxxxxx/ecf.samoliF3FE20D2") the *result/received
> > > > > > > > > > >           message* or is it another message being sent?
> > > > > > > > > > >
> > > > > > > > > > > If you could label the above with the sender container id and the
> > > > > > > > > > > receiver container id it would/will help.
> > > > > > > > > > >
> > > > > > > > > > > In the mean time, I will take your code and try to run it with
> > > > > > > > > > > my own
> > > > > > > > > > > gmail accounts to see if I can determine what's happening.
> > > > > > > > > > >
> > > > > > > > > > > Also, today I'm creating a datashare test case for the xmpp
> > > > > > > > > > > provider,
> > > > > > > > > > > which we can use to test this (and other behavior) with two
> > > > > > > > > > > arbitrary
> > > > > > > > > > >                       
> > > > > > > > > > > xmpp accounts.
> > > > > > > > > > >
> > > > > > > > > > > Thanks,
> > > > > > > > > > >
> > > > > > > > > > > Scott
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >                            
> > > > > > > > > > >                       
> > > > > > > > > > > > I do not understand what is this error?
> > > > > > > > > > > >
> > > > > > > > > > > > I have attached my code to the letter. Could you watch it?
> > > > > > > > > > > >
> > > > > > > > > > > > Thanks.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Scott Lewis ?8H5B:
> > > > > > > > > > > >  
> > > > > > > > > > > >                                  
> > > > > > > > > > > >                         
> > > > > > > > > > > > > Hi Pavel,
> > > > > > > > > > > > >
> > > > > > > > > > > > > I cannot currently duplicate this, so we're going to have to
> > > > > > > > > > > > > figure
> > > > > > > > > > > > > out
> > > > > > > > > > > > > a way for me to collect enough information to debug.
> > > > > > > > > > > > >
> > > > > > > > > > > > > One initial thought...could you run both clients with Smack
> > > > > > > > > > > > > debugging on
> > > > > > > > > > > > > (i.e. system property:  -Dsmack.debugEnabled=true) and
> > > > > > > > > > > > > capture the
> > > > > > > > > > > > > sent
> > > > > > > > > > > > > and received packets for both clients?  Please edit out the
> > > > > > > > > > > > > passwords in
> > > > > > > > > > > > > the xml data.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Also, what is the XMPP server at samolisov@xxxxx (i.e. what
> > > > > > > > > > > > > server
> > > > > > > > > > > > > software)?  And who configures it?
> > > > > > > > > > > > >
> > > > > > > > > > > > > Finally, if you wish you can run the tests in
> > > > > > > > > > > > > org.eclipse.ecf.tests.provider.xmpp with these two accounts. 
> > > > > > > > > > > > > The
> > > > > > > > > > > > > tests
> > > > > > > > > > > > > require system properties to specify the account/pw
> > > > > > > > > > > > > information...i.e.
> > > > > > > > > > > > > here's an example
> > > > > > > > > > > > >
> > > > > > > > > > > > > -Dusername0=user0@xxxxxxxxx
> > > > > > > > > > > > > -Dpassword0=user0pw
> > > > > > > > > > > > > -Dusername1=user1@xxxxxxxxx
> > > > > > > > > > > > > -Dpassword1=user1pw
> > > > > > > > > > > > > -Dchat.room.name=ecf
> > > > > > > > > > > > > -Dsmack.debugEnabled=true
> > > > > > > > > > > > >
> > > > > > > > > > > > > You will need to change the username?/password? info
> > > > > > > > > > > > > appropriately for
> > > > > > > > > > > > > the two accounts.  The test that you should probably run is
> > > > > > > > > > > > > org.eclipse.ecf.tests.provider.xmpp.remoteservice.RemoteServiceTest...many
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > of the other tests in that project test the chat room access
> > > > > > > > > > > > > (and
> > > > > > > > > > > > > gmail
> > > > > > > > > > > > > has no chat room capability), so those tests aren't relevant.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Finally, another option is that if you have access to
> > > > > > > > > > > > > creating an
> > > > > > > > > > > > > account on the ya.ru system for me (e.g. a guest or test
> > > > > > > > > > > > > account), I
> > > > > > > > > > > > > will try out the tests against my gmail/gtalk account.  So if
> > > > > > > > > > > > > you are
> > > > > > > > > > > > > able to create an account on ya.ru xmpp server for me (or let me
> > > > > > > > > > > > > know
> > > > > > > > > > > > > about accessing an existing account) please do so and I'll
> > > > > > > > > > > > > give it
> > > > > > > > > > > > > a try
> > > > > > > > > > > > > when I can.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Thanks,
> > > > > > > > > > > > >
> > > > > > > > > > > > > Scott
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > Samolisov Pavel wrote:
> > > > > > > > > > > > >                                           
> > > > > > > > > > > > >                           
> > > > > > > > > > > > > > I'm sorry for my English, Scott.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Yes, you are right. The sender is receiving the message but not
> > > > > > > > > > > > > > the
> > > > > > > > > > > > > > intended receiver.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >  
> > > > > > > > > > > > > >                                                   
> > > > > > > > > > > > > >                             
> > > > > > > > > > > > > > > > Are these XMPP servers able to communicate/federate?
> > > > > > > > > > > > > > > >                                                  
> > > > > > > > > > > > > > > >                           
> > > > > > > > > > > > > > > >                                 
> > > > > > > > > > > > > > Yes, they are.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Scott Lewis ?8H5B:
> > > > > > > > > > > > > >  
> > > > > > > > > > > > > >                                                   
> > > > > > > > > > > > > >                             
> > > > > > > > > > > > > > > Hi Pavel,
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Samolisov Pavel wrote:
> > > > > > > > > > > > > > >                                                              
> > > > > > > > > > > > > > >                               
> > > > > > > > > > > > > > > > -----BEGIN PGP SIGNED MESSAGE-----
> > > > > > > > > > > > > > > > Hash: SHA1
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Hello, folks!
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > I'm playing with Datashare API over XMPP-container and
> > > > > > > > > > > > > > > > have some
> > > > > > > > > > > > > > > > problems.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > I create ecf.xmpp.smack container, connect to my jabber
> > > > > > > > > > > > > > > > account
> > > > > > > > > > > > > > > > "samolisov@xxxxx" (connect fine, I watch myself online),
> > > > > > > > > > > > > > > > create
> > > > > > > > > > > > > > > > channel
> > > > > > > > > > > > > > > > with name "channel"
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > IChannelContainerAdapter channelContainer =
> > > > > > > > > > > > > > > > (IChannelContainerAdapter)
> > > > > > > > > > > > > > > > _container.getAdapter(IChannelContainerAdapter.class);
> > > > > > > > > > > > > > > > channelContainer.createChannel(getNewID(CHANNEL_NAME),
> > > > > > > > > > > > > > > > getChannelListener(), null);
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Bundle keep run.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Late, I start this bundle with another config: I create
> > > > > > > > > > > > > > > > ecf.xmpp.smack
> > > > > > > > > > > > > > > > container, connect to my jabber account "samolisov@xxxxxxxxx"
> > > > > > > > > > > > > > > > (connect
> > > > > > > > > > > > > > > > fine, I watch myself online) and create channel with name
> > > > > > > > > > > > > > > > "channel".
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > And send message over channel to my another account:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > IChannel sender = getChannel();
> > > > > > > > > > > > > > > > System.out.println("to = " + System.getProperty(XMPP_TO_ID));
> > > > > > > > > > > > > > > > sender.sendMessage(IDFactory.getDefault().createID(IDFactory.getDefault().getNamespaceByName(XMPP_NAMESPACE),"samolisov@ya,ru")
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > ,"Hello!".getBytes());
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Now are running two bundles with two containers.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > But! This data has sended to my container (i.e. container
> > > > > > > > > > > > > > > > that send
> > > > > > > > > > > > > > > > this
> > > > > > > > > > > > > > > > data: "samolisov@xxxxxxxxx") and do not received by container
> > > > > > > > > > > > > > > > that I
> > > > > > > > > > > > > > > > send this message ("samolisov@xxxxx").
> > > > > > > > > > > > > > > >                                                    
> > > > > > > > > > > > > > > >                           
> > > > > > > > > > > > > > > >                                 
> > > > > > > > > > > > > > > Your phrasing in the description above is a little unclear
> > > > > > > > > > > > > > > to me
> > > > > > > > > > > > > > > so I
> > > > > > > > > > > > > > > want to check:  are you saying that the "Hello" message is
> > > > > > > > > > > > > > > received by
> > > > > > > > > > > > > > > the container that's doing the sending (samolisov@xxxxxxxxx),
> > > > > > > > > > > > > > > rather
> > > > > > > > > > > > > > > than the target account/container? (i.e. samolisov@ya,ru
> > > > > > > > > > > > > > > ...I'm not
> > > > > > > > > > > > > > > sure if the comma is a typo, but I assume it is).  So the
> > > > > > > > > > > > > > > sender is
> > > > > > > > > > > > > > > receiving the message but not the intended receiver?
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > And I can see that the two accounts are on different XMPP
> > > > > > > > > > > > > > > servers
> > > > > > > > > > > > > > > (gmail.com and ya.ru).  Are these XMPP servers able to
> > > > > > > > > > > > > > > communicate/federate?
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Thanks,
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Scott
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >                                          
> > > > > > > > > > > > > > >                         
> > > > > > > > > > > > > > >                               
> > > > > > > > > > > > > >                                                         
> > > > > > > > > > > > > >                             
> > > > > > > > > > > >                                       
> > > > > > > > > > > >                         
> > > > > > > > > > >                               
> > > > > > > > > > >                       
> > > > > > > >               
> > > > > > > >                 
>
> - --
> Pavel Samolisov
>
> Meet me at:
> Vkontakte.ru: http://vkontakte.ru/id3178981
> Blog: http://samolisov.blogspot.com
> Twitter: http://twitter.com/samolisov
> XMPP/Jabber: samolisov@xxxxxxxxx
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.11 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
>
> iEYEARECAAYFAkrpw94ACgkQ20T0Vos3rqAuCgCfXnNutS8X3R7CtrD4PeGSq2fW
> OKQAn3Hzg6BPUBmd2TgUmyb42/S+iNIH
> =jgdi
> -----END PGP SIGNATURE-----
>