[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[
List Home]
|
Re: [ecf-dev] Troubles with Datashare over XMPP
|
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Thanks, Scott!
It fork fine for me! Yes! If I send message to jabber id/resource - this
is sended and receive correctly.
As it has turned out, I have two running jabber-clients, and gmail can't
chose right resource id.
I have tried with accounts on different servers (ya.ru and gmail.com).
It also works fine.
Scott Lewis пишет:
> Hi Pavel,
>
>
> Samolisov Pavel wrote:
> Scott, I add my accounts to their rosters (samolisov@xxxxxxxxx to
> pavel.samolisov@xxxxxxxxx and pavel.samolisov@xxxxxxxxx to
> samolisov@xxxxxxxxx). But it does not help me.
>
> Your error message has 500 error code and error string:
> <error code="503" type="cancel"> but I have this error string:
> <error code="400">
>
> May be this error means not correct jid?
>
>
>> That is possible, although I am not sure about the meaning of these
>> error codes for the gmail service. It may/probably is specified in the
>> xmpp specs, but I haven't looked yet.
>
>
> In my message xml:
> to="samolisov@xxxxxxxxx/", in your message:
> to="scottslewis@xxxxxxxxx/ecf.paluIbE9F19E8B"
>
> May be I should run/close another jabber client?
>
>
>> I think what you should do is use the fully qualified ID...i.e.
>> including the resource identifier (i.e. .../ecf.paluIbE9F19E8B). It
>> may/could be that the gmail xmpp server requires the fully qualified jid
>> in order to avoid 400. Note that once the accounts are in each other's
>> rosters, you can get the fully qualified ID from the roster.
>> Also, I modified the test code to use the fully qualified ID so you
>> can/could also try that (please) with your accounts.
>
>> Thanks,
>
>> Scott
>
>
>
> Scott Lewis ?8H5B:
>
>>>> Pavel,
>>>>
>>>> I got the error message below using two gmail accounts (is this what you
>>>> are seeing also)?. It seems to indicate that gmail is refusing to send
>>>> the message.
>>>>
>>>> However, when I added the contacts to each other's contact list/roster,
>>>> the messages were delivered (see below), and I did not see the error
>>>> message. It could be that gmail has a policy of limiting delivery of
>>>> certain messages (e.g. those that are just message properties?) when the
>>>> sender/receiver are not on each other's roster.
>>>>
>>>> Also, it may be necessary to use the fully qualified XMPPID (i.e. that
>>>> includes the resource). Would you please try the ChannelTest again
>>>> after adding having your two gmail accounts add each other to their
>>>> rosters?
>>>>
>>>> Thanks,
>>>>
>>>> Scott
>>>>
>>>> Here's the error response I get
>>>>
>>>> <message id="T7ATS-23" to="scottslewis@xxxxxxxxx/ecf.paluIbE9F19E8B"
>>>> type="error"
>>>> from="rcraftlewis@xxxxxxxxx/ecf.WzWjMhmXtt6dtH2pGPwz7pCq+sU="><thread>TR03n0</thread><properties
>>>>
>>>> xmlns="http://www.jivesoftware.com/xmlns/xmpp/properties";><property><name>org.eclipse.ecf.internal.provider.xmpp.smack.ECFConnection.object</name><value
>>>>
>>>> type="java-object">
>>>> 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
Gl0
>>>>
>>>>
> 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
</
>
> value></property></properties><nos:x
>
>>>> value="disabled" xmlns:nos="google:nosave"/><arc:record otr="false"
>>>> xmlns:arc="http://jabber.org/protocol/archive"/><error code="503"
>>>> type="cancel"><service-unavailable
>>>> xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/></error></message>
>>>>
>>>> console output with additions to contacts/roster
>>>>
>>>> receivercontainerid=GUID[IKjPtojKTzqOGFvAUaBbVbZXkXc=];
>>>> fromcontainerid=GUID[P0oT5XS22sgea3v9328oHCzJIqM=];
>>>> channelid=StringID[channel]
>>>>
>>>> event=ChannelMessageEvent[channelid=StringID[channel];fromid=GUID[P0oT5XS22sgea3v9328oHCzJIqM=];data=[B@5a5622]
>>>>
>>>>
>>>> message=hello
>>>>
>>>>
>>>>
>>>> Samolisov Pavel wrote:
>>>> Hello Scott.
>>>>
>>>> I have tried Channel Test on my gmail accounts, but it does not work
>>>> correctly.
>>>>
>>>> I got in the OSGi console:
>>>>
>>>> receivercontainerid=GUID[LFJWsv2VjBREyKuZONkNTMENAXo=];
>>>> fromcontainerid=GUID[LFJWsv2VjBREyKuZONkNTMENAXo=];
>>>> channelid=StringID[channel]
>>>>
>>>> event=ChannelMessageEvent[channelid=StringID[channel];fromid=GUID[LFJWsv2VjBREyKuZONkNTMENAXo=];data=[B@1cc2f42]
>>>>
>>>>
>>>> message=hello
>>>>
>>>> receivercontainerid=GUID[1miXQC+k9p01gzrzh+IpJurt+cc=];
>>>> fromcontainerid=GUID[1miXQC+k9p01gzrzh+IpJurt+cc=];
>>>> channelid=StringID[channel]
>>>>
>>>> event=ChannelMessageEvent[channelid=StringID[channel];fromid=GUID[1miXQC+k9p01gzrzh+IpJurt+cc=];data=[B@22d5b5]
>>>>
>>>>
>>>> message=hello
>>>>
>>>> i.e. receivercontainerid == fromcontainerid
>>>>
>>>> In debug window same error than I sent before. To my regret, Error
>>>> message isn't included in XMPP message, only error code.
>>>>
>>>>
>>>>
>>>>
>>>> Scott Lewis ?8H5B:
>>>>
>>>>
>>>>>>> Hi Pavel,
>>>>>>>
>>>>>>> I think I may have this sorted out.
>>>>>>>
>>>>>>> So, first I created and released a new xmpp test:
>>>>>>>
>>>>>>> org.eclipse.ecf.tests.provider.xmpp.datashare.ChannelTest
>>>>>>>
>>>>>>> This test works properly with my two gmail accounts specified as
>>>>>>> system
>>>>>>> properties (e.g.)
>>>>>>>
>>>>>>> -Dusername0=user0@xxxxxxxxx -Dpassword0=pw0
>>>>>>> -Dusername1=user1@xxxxxxxxx -Dpassword1=pw1
>>>>>>> -Dsmack.debugEnabled=true
>>>>>>>
>>>>>>> I would appreciated it if you would try this test with your initial
>>>>>>> accounts.
>>>>>>>
>>>>>>> In looking at your code, I think the problem is with this line:
>>>>>>>
>>>>>>> _container =
>>>>>>> ContainerFactory.getDefault().createContainer(XMPP_CONTAINER,
>>>>>>> System.getProperty(XMPP_ACCOUNT_ID));
>>>>>>>
>>>>>>> It should rather be:
>>>>>>>
>>>>>>> _container =
>>>>>>> ContainerFactory.getDefault().createContainer(XMPP_CONTAINER);
>>>>>>>
>>>>>>>
>>>>>>> The reason for this is that the containerID (that's created for the
>>>>>>> container via this factory method) is *not* intended to be the
>>>>>>> same as
>>>>>>> the account that is connected to (i.e. the 'targetID' passed into
>>>>>>> container.connect(targetID, context)).
>>>>>>>
>>>>>>> In your createContainer call above, you specify the
>>>>>>> XMPP_ACCOUNT_ID for
>>>>>>> the containerID...and so that String is used for both the containerID
>>>>>>> *and* for the targetID...i.e. what targetID the container connects
>>>>>>> *to*. These should never be the same, actually...as the containerID
>>>>>>> should be unique relative to the server that it is connecting to
>>>>>>> (represented by the connect targetID). So in your case the
>>>>>>> containerID
>>>>>>> *is* the same as the connect targetID, and the message just gets
>>>>>>> delivered *back* to the originator (and not sent onto the target).
>>>>>>>
>>>>>>> So, in short, if you change the createContainer call above to
>>>>>>> create a
>>>>>>> new ID for your client container, I suspect things will most probably
>>>>>>> work for you.
>>>>>>>
>>>>>>> Please do let all know if this does/doesn't settle things for
>>>>>>> you. If
>>>>>>> not and I'm wrong...then we'll try again.
>>>>>>>
>>>>>>> Thanks,
>>>>>>>
>>>>>>> Scott
>>>>>>>
>>>>>>>
>>>>>>> Samolisov Pavel wrote:
>>>>>>>
>>>>>>> Scott, I create container by following code:
>>>>>>>
>>>>>>> _container =
>>>>>>> ContainerFactory.getDefault().createContainer(XMPP_CONTAINER,
>>>>>>> System.getProperty(XMPP_ACCOUNT_ID));
>>>>>>>
>>>>>>> but container hasn't readable ID.
>>>>>>>
>>>>>>> The message to="pavel.samolisov@xxxxxxxxx/"...is the message that I
>>>>>>> sended.
>>>>>>>
>>>>>>> The message
>>>>>>> <message id="9Q3m5-4" to="samolisov@xxxxxxxxx/ecf.samoliF3FE20D2"
>>>>>>> from="pavel.samolisov@xxxxxxxxx/" type="error">
>>>>>>>
>>>>>>> is error message that I received and ChannelListener in my bundle
>>>>>>> reacts
>>>>>>> on this message.
>>>>>>>
>>>>>>> samolisov@xxxxxxxxx sends message to pavel.samolisov@xxxxxxxxx
>>>>>>> samolisov@xxxxxxxxx receives message from pavel.samolisov@xxxxxxxxx
>>>>>>> (error message but this message include sended data).
>>>>>>> pavel.samolisov@xxxxxxxxx does not receive message that sended by
>>>>>>> samolisov@xxxxxxxxx
>>>>>>>
>>>>>>> I do not send any others messages.
>>>>>>>
>>>>>>>
>>>>>>> Scott Lewis ?8H5B:
>>>>>>>
>>>>>>>
>>>>>>>>>> Hi Pavel,
>>>>>>>>>>
>>>>>>>>>> Thanks for sticking with this...we'll track down the issue one
>>>>>>>>>> way or
>>>>>>>>>> another.
>>>>>>>>>>
>>>>>>>>>> Samolisov Pavel wrote:
>>>>>>>>>>
>>>>>>>>>>> Thanks for your help, Scott!
>>>>>>>>>>>
>>>>>>>>>>> I try it on gmail.com only.
>>>>>>>>>>>
>>>>>>>>>>> I send data from samolisov@xxxxxxxxx to pavel.samolisov@xxxxxxxxx
>>>>>>>>>>> and
>>>>>>>>>>> add -Dsmack.debugEnabled=true to my run configuration.
>>>>>>>>>>>
>>>>>>>>>>> But it does not work correct :-(
>>>>>>>>>>>
>>>>>>>>>>> I send data (over DataSharing API Channel) from
>>>>>>>>>>> samolisov@xxxxxxxxx to
>>>>>>>>>>> pavel.samolisov@xxxxxxxxx
>>>>>>>>>>>
>>>>>>>>>>> In Smack Debug Window I can see:
>>>>>>>>>>>
>>>>>>>>>>> <message id="9Q3m5-4" to="pavel.samolisov@xxxxxxxxx/"
>>>>>>>>>>> type="chat">
>>>>>>>>>>> <thread>N4E940</thread>
>>>>>>>>>>> <properties
>>>>>>>>>>> xmlns="http://www.jivesoftware.com/xmlns/xmpp/properties";>
>>>>>>>>>>> <property>
>>>>>>>>>>> <name>org.eclipse.ecf.internal.provider.xmpp.smack.ECFConnection.object</name>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> <value
>>>>>>>>>>> type="java-object">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
pdH
>>>>>>>>>>>
>>>>>>>>>>>
> kvT
>
>>>>>>>>>>>
>>>> mFt
>>>>
>>>>
>>>>>>>>>>>
>>>>>>> ZXN
>>>>>>>
>>>>>>>
>>>>>>>>>>> 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</value>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> </property>
>>>>>>>>>>> </properties>
>>>>>>>>>>> </message>
>>>>>>>>>>>
>>>>>>>>>>> And not long after:
>>>>>>>>>>>
>>>>>>>>>>> <message id="9Q3m5-4" to="samolisov@xxxxxxxxx/ecf.samoliF3FE20D2"
>>>>>>>>>>> from="pavel.samolisov@xxxxxxxxx/" type="error">
>>>>>>>>>>> <thread>N4E940</thread>
>>>>>>>>>>> <error code="400"/>
>>>>>>>>>>> <properties
>>>>>>>>>>> xmlns="http://www.jivesoftware.com/xmlns/xmpp/properties";>
>>>>>>>>>>> <property>
>>>>>>>>>>>
>>>>>>>>>>> <name>org.eclipse.ecf.internal.provider.xmpp.smack.ECFConnection.object</name>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> <value
>>>>>>>>>>> type="java-object">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
pdH
>>>>>>>>>>>
>>>>>>>>>>>
> kvT
>
>>>>>>>>>>>
>>>> mFt
>>>>
>>>>
>>>>>>>>>>>
>>>>>>> ZXN
>>>>>>>
>>>>>>>
>>>>>>>>>>> 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</value>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> </property>
>>>>>>>>>>> </properties>
>>>>>>>>>>> </message>
>>>>>>>>>>>
>>>>>>>>>> I just want to clarify...which containers (and their associated
>>>>>>>>>> connections) are sending/receiving the above?
>>>>>>>>>>
>>>>>>>>>> It looks like the message sent is
>>>>>>>>>> to="pavel.samolisov@xxxxxxxxx/"...is
>>>>>>>>>> the following message (with
>>>>>>>>>>
>>>>>>>>>> to="samolisov@xxxxxxxxx/ecf.samoliF3FE20D2") the *result/received
>>>>>>>>>> message* or is it another message being sent?
>>>>>>>>>>
>>>>>>>>>> If you could label the above with the sender container id and the
>>>>>>>>>> receiver container id it would/will help.
>>>>>>>>>>
>>>>>>>>>> In the mean time, I will take your code and try to run it with
>>>>>>>>>> my own
>>>>>>>>>> gmail accounts to see if I can determine what's happening.
>>>>>>>>>>
>>>>>>>>>> Also, today I'm creating a datashare test case for the xmpp
>>>>>>>>>> provider,
>>>>>>>>>> which we can use to test this (and other behavior) with two
>>>>>>>>>> arbitrary
>
>>>>>>>>>> xmpp accounts.
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>>
>>>>>>>>>> Scott
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> I do not understand what is this error?
>>>>>>>>>>>
>>>>>>>>>>> I have attached my code to the letter. Could you watch it?
>>>>>>>>>>>
>>>>>>>>>>> Thanks.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Scott Lewis ?8H5B:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> Hi Pavel,
>>>>>>>>>>>>
>>>>>>>>>>>> I cannot currently duplicate this, so we're going to have to
>>>>>>>>>>>> figure
>>>>>>>>>>>> out
>>>>>>>>>>>> a way for me to collect enough information to debug.
>>>>>>>>>>>>
>>>>>>>>>>>> One initial thought...could you run both clients with Smack
>>>>>>>>>>>> debugging on
>>>>>>>>>>>> (i.e. system property: -Dsmack.debugEnabled=true) and
>>>>>>>>>>>> capture the
>>>>>>>>>>>> sent
>>>>>>>>>>>> and received packets for both clients? Please edit out the
>>>>>>>>>>>> passwords in
>>>>>>>>>>>> the xml data.
>>>>>>>>>>>>
>>>>>>>>>>>> Also, what is the XMPP server at samolisov@xxxxx (i.e. what
>>>>>>>>>>>> server
>>>>>>>>>>>> software)? And who configures it?
>>>>>>>>>>>>
>>>>>>>>>>>> Finally, if you wish you can run the tests in
>>>>>>>>>>>> org.eclipse.ecf.tests.provider.xmpp with these two accounts.
>>>>>>>>>>>> The
>>>>>>>>>>>> tests
>>>>>>>>>>>> require system properties to specify the account/pw
>>>>>>>>>>>> information...i.e.
>>>>>>>>>>>> here's an example
>>>>>>>>>>>>
>>>>>>>>>>>> -Dusername0=user0@xxxxxxxxx
>>>>>>>>>>>> -Dpassword0=user0pw
>>>>>>>>>>>> -Dusername1=user1@xxxxxxxxx
>>>>>>>>>>>> -Dpassword1=user1pw
>>>>>>>>>>>> -Dchat.room.name=ecf
>>>>>>>>>>>> -Dsmack.debugEnabled=true
>>>>>>>>>>>>
>>>>>>>>>>>> You will need to change the username?/password? info
>>>>>>>>>>>> appropriately for
>>>>>>>>>>>> the two accounts. The test that you should probably run is
>>>>>>>>>>>> org.eclipse.ecf.tests.provider.xmpp.remoteservice.RemoteServiceTest...many
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> of the other tests in that project test the chat room access
>>>>>>>>>>>> (and
>>>>>>>>>>>> gmail
>>>>>>>>>>>> has no chat room capability), so those tests aren't relevant.
>>>>>>>>>>>>
>>>>>>>>>>>> Finally, another option is that if you have access to
>>>>>>>>>>>> creating an
>>>>>>>>>>>> account on the ya.ru system for me (e.g. a guest or test
>>>>>>>>>>>> account), I
>>>>>>>>>>>> will try out the tests against my gmail/gtalk account. So if
>>>>>>>>>>>> you are
>>>>>>>>>>>> able to create an account on ya.ru xmpp server for me (or let me
>>>>>>>>>>>> know
>>>>>>>>>>>> about accessing an existing account) please do so and I'll
>>>>>>>>>>>> give it
>>>>>>>>>>>> a try
>>>>>>>>>>>> when I can.
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>
>>>>>>>>>>>> Scott
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Samolisov Pavel wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> I'm sorry for my English, Scott.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Yes, you are right. The sender is receiving the message but not
>>>>>>>>>>>>> the
>>>>>>>>>>>>> intended receiver.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Are these XMPP servers able to communicate/federate?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>> Yes, they are.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Scott Lewis ?8H5B:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Pavel,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Samolisov Pavel wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> -----BEGIN PGP SIGNED MESSAGE-----
>>>>>>>>>>>>>>> Hash: SHA1
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hello, folks!
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I'm playing with Datashare API over XMPP-container and
>>>>>>>>>>>>>>> have some
>>>>>>>>>>>>>>> problems.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I create ecf.xmpp.smack container, connect to my jabber
>>>>>>>>>>>>>>> account
>>>>>>>>>>>>>>> "samolisov@xxxxx" (connect fine, I watch myself online),
>>>>>>>>>>>>>>> create
>>>>>>>>>>>>>>> channel
>>>>>>>>>>>>>>> with name "channel"
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> IChannelContainerAdapter channelContainer =
>>>>>>>>>>>>>>> (IChannelContainerAdapter)
>>>>>>>>>>>>>>> _container.getAdapter(IChannelContainerAdapter.class);
>>>>>>>>>>>>>>> channelContainer.createChannel(getNewID(CHANNEL_NAME),
>>>>>>>>>>>>>>> getChannelListener(), null);
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Bundle keep run.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Late, I start this bundle with another config: I create
>>>>>>>>>>>>>>> ecf.xmpp.smack
>>>>>>>>>>>>>>> container, connect to my jabber account "samolisov@xxxxxxxxx"
>>>>>>>>>>>>>>> (connect
>>>>>>>>>>>>>>> fine, I watch myself online) and create channel with name
>>>>>>>>>>>>>>> "channel".
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> And send message over channel to my another account:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> IChannel sender = getChannel();
>>>>>>>>>>>>>>> System.out.println("to = " + System.getProperty(XMPP_TO_ID));
>>>>>>>>>>>>>>> sender.sendMessage(IDFactory.getDefault().createID(IDFactory.getDefault().getNamespaceByName(XMPP_NAMESPACE),"samolisov@ya,ru")
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> ,"Hello!".getBytes());
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Now are running two bundles with two containers.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> But! This data has sended to my container (i.e. container
>>>>>>>>>>>>>>> that send
>>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>> data: "samolisov@xxxxxxxxx") and do not received by container
>>>>>>>>>>>>>>> that I
>>>>>>>>>>>>>>> send this message ("samolisov@xxxxx").
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Your phrasing in the description above is a little unclear
>>>>>>>>>>>>>> to me
>>>>>>>>>>>>>> so I
>>>>>>>>>>>>>> want to check: are you saying that the "Hello" message is
>>>>>>>>>>>>>> received by
>>>>>>>>>>>>>> the container that's doing the sending (samolisov@xxxxxxxxx),
>>>>>>>>>>>>>> rather
>>>>>>>>>>>>>> than the target account/container? (i.e. samolisov@ya,ru
>>>>>>>>>>>>>> ...I'm not
>>>>>>>>>>>>>> sure if the comma is a typo, but I assume it is). So the
>>>>>>>>>>>>>> sender is
>>>>>>>>>>>>>> receiving the message but not the intended receiver?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> And I can see that the two accounts are on different XMPP
>>>>>>>>>>>>>> servers
>>>>>>>>>>>>>> (gmail.com and ya.ru). Are these XMPP servers able to
>>>>>>>>>>>>>> communicate/federate?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Scott
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>
>
- --
Pavel Samolisov
Meet me at:
Vkontakte.ru: http://vkontakte.ru/id3178981
Blog: http://samolisov.blogspot.com
Twitter: http://twitter.com/samolisov
XMPP/Jabber: samolisov@xxxxxxxxx
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAkrpw94ACgkQ20T0Vos3rqAuCgCfXnNutS8X3R7CtrD4PeGSq2fW
OKQAn3Hzg6BPUBmd2TgUmyb42/S+iNIH
=jgdi
-----END PGP SIGNATURE-----
