[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[
List Home]
Re: [sumo-user] Resolve network warnings
|
I cannot see the connections but those messages may be normal, as by default netconvert will reduce the allowed speed inside intersections depending on the curvature. Please look at the options --junctions.limit-turn-speed and --junctions.limit-turn-speed.min-angle.
Best regards
Mirko
-----Original-Nachricht-----
Betreff: [sumo-user] Resolve network warnings
Datum: 2024-03-06T14:49:47+0100
Von: "fereshte jafari via sumo-user" <sumo-user@xxxxxxxxxxx>
An: "Sumo project User discussions" <sumo-user@xxxxxxxxxxx>
Hello!
I am facing many warnings in my network. Several of them related to a roundabout as shown in the picture below:
Beside that, I also have the below warnings:
Warning: Speed of straight connection '-604070588_1->-33040725_1' reduced by 7.28 due to turning radius of 20.06 (length=7.15, angle=36.28).
Warning: Speed of straight connection '33040725_0->604070588_0' reduced by 5.53 due to turning radius of 27.30 (length=9.84, angle=36.28).
Warning: Speed of straight connection '33040725_1->604070588_1' reduced by 6.14 due to turning radius of 24.65 (length=8.86, angle=36.28).
Warning: Speed of straight connection '713933105_1->604070587_1' reduced by 6.08 due to turning radius of 24.89 (length=11.41, angle=42.13).
Warning: Speed of straight connection '-604070587_0->-713933105_0' reduced by 7.63 due to turning radius of 18.73 (length=8.49, angle=42.13).
By clicking on them it does not go to the warning place on the network and I have no idea on how to get rid of them.
Any ideas and suggestions would be appreciated.
--
Sincerely,
Fereshteh Jafari Shahdani
PhD candidate, Dep. of Civil Engineering
ISISE - University of Minho