Skip to main content
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [List Home]
Re: [papyrus-rt-dev] New Errors: Missing artifacts after merging 72033
What a pickle. Are sure that what's missing is only the m2e connectors? That would resolve all the errors, or you still get some?


On Thu, May 5, 2016 at 9:16 AM Christian Damus <give.a.damus@xxxxxxxxx> wrote:
Interesting.  It turns out that the Tycho Project Configurators feature was not installed by Oomph in my Eclipse at all.  I must have got it from the m2e connector discovery catalogue some time ago.  The reason why I thought it must have been Oomphed is that it has persisted through quite a lot of Oomph-driven p2 installs, and I hadn’t expected that this would work.  I thought Oomph would replace the entire p2 profile of the installation every time, but it doesn’t; it seems to maintain bundles that are installed by other means.

So, sorry about that.  I’m not sure now what’s the best way forward.  We can add a few m2e connectors that we need to the setup model, but the update sites that they pull from are very version specific (they are not continually accumulating composites such as Papyrus of the Simultaneous Release) so it seems like a maintenance pain.  And the setup of course doesn’t provide for automation of the m2e connector discovery installation.

Suggestions?

At any rate, the setup change that I posted to Gerrit for the maven-helper connector is invalid because it assumes an update site already known to my installation that a new installation via Oomph would not have.

Christian


On 4 May, 2016 at 14:37:43, Ernesto Posse (eposse@xxxxxxxxxxxxx) wrote:

How come I don't have it if I'm also on my Oomph-managed Eclipse? Any ideas?



On Wed, May 4, 2016 at 2:36 PM Christian Damus <give.a.damus@xxxxxxxxx> wrote:
That’s a good question.  I have it installed in my Oomph-managed Eclipse, but it isn’t explicitly referenced by our setup model, so I supposed it must be a dependency of something else (perhaps m2e, itself?).

cW



On 4 May, 2016 at 14:26:54, Ernesto Posse (eposse@xxxxxxxxxxxxx) wrote:

I found the org.eclipse.m2e feature installed, but I don't see the Tycho Project Configurator anywhere. You say you do have it? From which repository is that supposedly obtained?



On Wed, May 4, 2016 at 2:05 PM Christian Damus <give.a.damus@xxxxxxxxx> wrote:
Hi, Ernesto, Céline,

I’ve put up a Gerrit review for the setup model to add the new m2e connector this is required:

However, we still have some errors that I think go back to the introduction of the code generation integration in the build:

Plugin execution not covered by lifecycle configuration: org.codehaus.mojo:build-helper-maven-plugin:1.7:add-source (execution: add-source, phase: generate-sources)

Plugin execution not covered by lifecycle configuration: org.apache.maven.plugins:maven-antrun-plugin: 1.8:run (execution: make, phase: generate-sources)

I don’t know how to fix these.

Christian




On 4 May, 2016 at 13:49:07, Ernesto Posse (eposse@xxxxxxxxxxxxx) wrote:

I hit send too soon.

The development .setup includes the m2e plugin: 

  m2e - Maven Integration for Eclipse (includes Incubating components) 1.7.0.20160321-2203 org.eclipse.m2e.feature.feature.group Eclipse.org - m2e

After right-clicking on a project -> Maven -> Update Projects... -> Select all -> OK, it rebuilds but I still get the errors, and even after a Project->Clean...->All I still get the same errors, and this is on a freshly installed version. So that's not enough.
On Wed, May 4, 2016 at 1:45 PM Ernesto Posse <eposse@xxxxxxxxxxxxx> wrote:
The development setup already installs m2e:



On Wed, May 4, 2016 at 12:11 PM Céline JANSSENS <celine.janssens@xxxxxxxxxxx> wrote:

Hello Ernesto,

You should install the m2e plugin that is required to manage maven plugins.

I don't remember the exact name:

Then you will be able to make a "Update Project..." from the plugin menu:



This may update the classpath. But I don't know if we must commit this kind of change.

HTH

Céline
Le 04/05/2016 à 17:34, Ernesto Posse a écrit :
I think change 72033 might have been merging too soon.

Now I get a lot of errors in my workbench in almost all plugins, mostly missing artifacts: e.g.

Description Resource Path Location Type
Missing artifact javax.annotation:jsr250-api:jar:1.0 pom.xml /org.eclipse.papyrusrt.codegen line 1 Maven Dependency Problem
Missing artifact aopalliance:aopalliance:jar:1.0 pom.xml /org.eclipse.papyrusrt.codegen line 1 Maven Dependency Problem
Missing artifact com.google.guava:guava:jar:14.0.1 pom.xml /org.eclipse.papyrusrt.xtumlrt.xtext.feature line 1 Maven Dependency Problem
Missing artifact com.google.inject:guice:jar:3.0 pom.xml /org.eclipse.papyrusrt.codegen line 1 Maven Dependency Problem
Missing artifact javax.enterprise:cdi-api:jar:1.0 pom.xml /org.eclipse.papyrusrt.codegen line 1 Maven Dependency Problem

and in every pom.xml I get:

On the <parent>:

- Plugin execution not covered by lifecycle configuration: org.codehaus.mojo:build-helper-maven-plugin:1.7:add-source (execution: add-source, phase: generate-

sources)

- Plugin execution not covered by lifecycle configuration: org.eclipse.tycho:tycho-compiler-plugin:0.24.0:compile (execution: default-compile, phase: compile)

On <packaging>:

- Plugin execution not covered by lifecycle configuration: org.eclipse.tycho:tycho-packaging-plugin:0.24.0:validate-id (execution: default-validate-id, phase: validate)

- Plugin execution not covered by lifecycle configuration: org.eclipse.tycho:tycho-packaging-plugin:0.24.0:build-qualifier (execution: default-build-qualifier, phase: validate)

- Plugin execution not covered by lifecycle configuration: org.eclipse.tycho:tycho-packaging-plugin:0.24.0:validate-version (execution: default-validate-version, phase: 

validate)


What happened? And how do we fix it?

Do we need to update the Oomph .setup files as well for the dependencies?



_______________________________________________
papyrus-rt-dev mailing list
papyrus-rt-dev@xxxxxxxxxxx
To change your delivery options, retrieve your password, or unsubscribe from this list, visit
https://dev.eclipse.org/mailman/listinfo/papyrus-rt-dev

--

 
  Céline JANSSENS
 Software Engineer
+33 (0)2 44 47 23 23
  Mail : cej@xxxxxxxxxxx
6 rue Léonard De Vinci - BP 0119 - 53001 LAVAL Cedex - FRANCE
www.all4tec.net
_______________________________________________
papyrus-rt-dev mailing list
papyrus-rt-dev@xxxxxxxxxxx
To change your delivery options, retrieve your password, or unsubscribe from this list, visit
https://dev.eclipse.org/mailman/listinfo/papyrus-rt-dev
_______________________________________________
papyrus-rt-dev mailing list
papyrus-rt-dev@xxxxxxxxxxx
To change your delivery options, retrieve your password, or unsubscribe from this list, visit
https://dev.eclipse.org/mailman/listinfo/papyrus-rt-dev
_______________________________________________
papyrus-rt-dev mailing list
papyrus-rt-dev@xxxxxxxxxxx
To change your delivery options, retrieve your password, or unsubscribe from this list, visit
https://dev.eclipse.org/mailman/listinfo/papyrus-rt-dev
_______________________________________________
papyrus-rt-dev mailing list
papyrus-rt-dev@xxxxxxxxxxx
To change your delivery options, retrieve your password, or unsubscribe from this list, visit
https://dev.eclipse.org/mailman/listinfo/papyrus-rt-dev
_______________________________________________
papyrus-rt-dev mailing list
papyrus-rt-dev@xxxxxxxxxxx
To change your delivery options, retrieve your password, or unsubscribe from this list, visit
https://dev.eclipse.org/mailman/listinfo/papyrus-rt-dev
_______________________________________________
papyrus-rt-dev mailing list
papyrus-rt-dev@xxxxxxxxxxx
To change your delivery options, retrieve your password, or unsubscribe from this list, visit
https://dev.eclipse.org/mailman/listinfo/papyrus-rt-dev
_______________________________________________
papyrus-rt-dev mailing list
papyrus-rt-dev@xxxxxxxxxxx
To change your delivery options, retrieve your password, or unsubscribe from this list, visit
https://dev.eclipse.org/mailman/listinfo/papyrus-rt-dev

Back to the top