Hi Kenn, Yann,
here is the MDT papyrus version for test case1.
Some elements do not appear graphically (composition, aggregation,
multiplicity on association end) but most elements are there.
To be honest, I coudl not work with only the diagram editor and the
property view. I had sometimes to use the model explorer to set some
values and then use drag and drop from the model explorer to reflect it
in the diagram.
That is a good beggining.
regards
raphaël
Remark : I tried to commit this test case but could not (commit
refused...).Perhaps due to ssh authorizations that I do not get ?
I will try again on monday
TANGUY Yann 176637 a écrit :
Sure, feel
free to create the Papyrus MDT
version.
Regards,
Yann
I can if Tanguy has no time to do it. Just
tell me
regards
raphaël
Kenn Hussey a écrit :
Yann,
Thanks very much for
the update. Would
it be possible for you (or someone else) to produce similar results
using the
“new” Papyrus, i.e. based on the source code that’s available
at Eclipse?
Thanks,
Kenn
Hussey
Program Manager, Modeling and Design Solutions
![[Embarcadero Technologies Logo]](jpgWM4I6rhg9Q.jpg)
Embarcadero
Technologies, Inc. | www.embarcadero.com
82 Peter Street, Second Floor |
Toronto, ON M5V
2G5
Kenn.Hussey@xxxxxxxxxxxxxxx
Office:
416-593-1585
x9296 Mobile: 613-301-9105
I join the project with
both
models.
The archive contains
the following
files:
- KennXMITest_P1.di2 /
.uml / .xmi
: the model created from scratch (based on you image)
- valid.di2 / .uml :
the model
initiated from your xmi file
- valid_original.xmi /
.uml : a
copy of your xmi file and its "manual" conversion to uml with the
UML2 sample editor. You may want to use this copy to compare with other
xmi files.
- valid_reexport.xmi :
the
"valid" model reexported back to xmi (still via UML2 sample editor)
after the creation of diagram in valid.di2. I was curious to compare
the
initial valid.xmi to the same model after import / export in the UML2
sample editor.
CEA SACLAY
DRT/LIST/DTSI/SOL/LISE
91191 Gif sur Yvette
FRANCE
De: mdt-papyrus.dev-bounces@xxxxxxxxxxx
de la part de Kenn Hussey
Date: ven. 20/03/2009
22:21
À: Papyrus Project list; GERARD Sebastien
166342
Objet : RE:
[mdt-papyrus.dev]
Model Interchange
Thanks, Yann. Could
you remind me again
where the “old” Papyrus can be found? Also, could you send me the
XMI for the models these diagrams are based on?
Cheers,
Kenn
Hussey
Program Manager, Modeling and Design Solutions
![[Embarcadero Technologies Logo]]()
Embarcadero
Technologies, Inc. | www.embarcadero.com
82 Peter Street, Second Floor | Toronto, ON M5V 2G5
Kenn.Hussey@xxxxxxxxxxxxxxx
Office: 416-593-1585 x9296
Mobile:
613-301-9105
Hi Kenn,
I made the
test with "old"
Papyrus version, creating the model from scratch, and importing your
xmi (via
UML2 sample editor) then creating a class diagram that reference the
imported
model.
You'll find
the results joined to this
mail.
Regards
Yann Tanguy.
Sébastien,
Some (minor) changes
have been made to
the test case. Could you base your model/diagram on the updated diagram
and
“reference” XMI attached?
Thanks,
Kenn
Hussey
Program Manager, Modeling and Design Solutions
![[Embarcadero Technologies Logo]]()
Embarcadero
Technologies, Inc. | www.embarcadero.com
82 Peter Street, Second Floor | Toronto, ON M5V 2G5
Kenn.Hussey@xxxxxxxxxxxxxxx
Office: 416-593-1585 x9296
Mobile:
613-301-9105
Sebastien,
Thanks for your
willingness to
participate! To get started, could you please use Papyrus to produce a
diagram similar
(as close as possible) to the attached reference diagram (the first
test case)
and send a PNG image if it to me. Also, to participate in the
interchange
initiative, we will need to provide “standard” UML 2.1.1 XMI based
on the semantic elements shown in the diagram. According to the rules
of
engagement for the working group, there should be a user-accessible
action to
trigger saving/exporting of the XMI, but it’s OK if that’s not the
case currently (e.g. I could use the UML2 sample editor to produce it
for now).
It would be great if
you could do this
and send me the results by (my) Monday, although I realize that may be
pushing
it… ;)
Cheers,
Kenn
Hussey
Program Manager, Modeling and Design Solutions
![[Embarcadero Technologies Logo]]()
Embarcadero
Technologies, Inc. | www.embarcadero.com
82 Peter Street, Second Floor | Toronto, ON M5V 2G5
Kenn.Hussey@xxxxxxxxxxxxxxx
Office: 416-593-1585 x9296
Mobile:
613-301-9105
From: GERARD
Sebastien 166342 [mailto:Sebastien.GERARD@xxxxxx]
Sent: Thursday, March
12, 2009
10:11 AM
To: Kenn Hussey
Cc: MDT UML2 mailing
list; Papyrus Project list;
MDT UML2 Tools mailing list
Subject: RE:
[mdt-papyrus.dev]
Model Interchange
Hi Kenn,
Of
course, that's sound
good for us. I am also ok to work with you on that task.
Cheers…
Sébastien.
Teams,
There is an initiative underway at the OMG to
try to
successfully demonstrate interchange between different products/tools
that support UML modeling.
To date, I have been involved
the working group that is pursuing this, by helping prepare test cases.
The
basic idea is that, for each test case, a reference diagram and XMI
serialization are provided (so far by me) and each participating
vendor/tool is
to 1) attempt to create the diagram from scratch using their tool and
save/export the corresponding XMI and 2) attempt to open/import the XMI
produced by the other vendors/tools and report on the results.
I think it should be important to us that
tools based
on the reference open source implementation of UML (like UML2 Tools and
Papyrus) participate in this initiative. I would be happy to represent
you in
this initiative, but first I would need an _expression_ of interest from
you
(e.g. from your component/project lead) and a general commitment to
fixing any
issues that are identified. What do you think?
Please let me know if you have any questions
and/or
concerns.
Thanks,
Kenn
Hussey
Program Manager, Modeling and Design Solutions
![[Embarcadero Technologies Logo]]()
Embarcadero
Technologies, Inc. | www.embarcadero.com
82 Peter Street, Second Floor | Toronto, ON M5V 2G5
Kenn.Hussey@xxxxxxxxxxxxxxx
Office: 416-593-1585 x9296
Mobile:
613-301-9105
_______________________________________________
mdt-papyrus.dev mailing list
mdt-papyrus.dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/mdt-papyrus.dev
--
![Image Signature IOC](gifyvkSv0jTGZ.gif)
|
Raphaël
FAUDOU
Responsable
cellule Innovation / bureau méthodes
Head of
Innovation & Method Definition
Atos Origin
Tel : +33 (0)5 34 36 32 89
Tel : +33 (0)6 10 53 50 44
Mail : raphael.faudou@xxxxxxxxxxxxxx
|
Atos Origin
6, Impasse Alice Guy
BP 43045
31024 Toulouse Cedex 3
|
P Avant
d'imprimer cet e-mail, pensez à l'environnement. Ce
message et les pièces jointes sont confidentiels et réservés à l'usage
exclusif de ses destinataires. Il peut également être protégé par le
secret professionnel. Si vous recevez ce message par erreur, merci d'en
avertir immédiatement l'expéditeur et de le détruire. L'intégrité du
message ne pouvant être assurée sur Internet, la responsabilité du
groupe Atos Origin ne pourra être recherchée quant au contenu de ce
message. Bien que les meilleurs efforts soient faits pour maintenir
cette transmission exempte de tout virus, l'expéditeur ne donne aucune
garantie à cet égard et sa responsabilité ne saurait être recherchée
pour tout dommage résultant d'un virus transmis.
P Please
consider your environmental responsibility before printing this e-mail.
This e-mail and the
documents attached are confidential and intended solely for the
addressee; it may also be privileged. If you receive this e-mail in
error, please notify the sender immediately and destroy it. As its
integrity cannot be secured on the Internet, the Atos Origin group
liability cannot be triggered for the message content. Although the
sender endeavours to maintain a computer virus-free network, the sender
does not warrant that this transmission is virus-free and will not be
liable for any damages resulting from any virus transmitted.
|
--
Raphaël FAUDOU
|
Raphaël FAUDOU
Responsable cellule
Innovation / bureau méthodes
Head
of Innovation & Method Definition
Atos
Origin
Tel : +33 (0)5 34 36 32 89
Tel : +33 (0)6 10 53 50 44
Mail : raphael.faudou@xxxxxxxxxxxxxx
|
Atos Origin
6, Impasse Alice Guy
BP 43045
31024 Toulouse Cedex 3
|
P Avant
d'imprimer cet e-mail, pensez à l'environnement. Ce message et les
pièces jointes sont confidentiels et réservés à l'usage exclusif de ses
destinataires. Il peut également être protégé par le secret
professionnel. Si vous recevez ce message par erreur, merci d'en
avertir immédiatement l'expéditeur et de le détruire. L'intégrité du
message ne pouvant être assurée sur Internet, la responsabilité du
groupe Atos Origin ne pourra être recherchée quant au contenu de ce
message. Bien que les meilleurs efforts soient faits pour maintenir
cette transmission exempte de tout virus, l'expéditeur ne donne aucune
garantie à cet égard et sa responsabilité ne saurait être recherchée
pour tout dommage résultant d'un virus transmis.
P Please
consider your environmental responsibility before printing this e-mail.
This e-mail
and the
documents attached are confidential and intended solely for the
addressee; it may also be privileged. If you receive this e-mail in
error, please notify the sender immediately and destroy it. As its
integrity cannot be secured on the Internet, the Atos Origin group
liability cannot be triggered for the message content. Although the
sender endeavours to maintain a computer virus-free network, the sender
does not warrant that this transmission is virus-free and will not be
liable for any damages resulting from any virus transmitted. |
|