Skip to main content
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [List Home]
Re: [sumo-user] Calibrators Not Spawning

Hi Kaitlyn, 

 

I can't reproduce this with our test examples. Could you please post at least your updated calibrator definitions (or better even attach a minimal failing scenario to run in sumo)?

 

Best regards

Mirko

 

 

 

 

-----Original-Nachricht-----

Betreff: Re: [sumo-user] Calibrators Not Spawning

Datum: 2024-04-11T17:48:22+0200

Von: "Kaitlyn Liu" <liu.kaitlync@xxxxxxxxx>

An: "Mirko Barthauer" <m.barthauer@xxxxxxxxxxx>

 

 

 

 
Just realized I didn’t reply to the mailing list, so resending my previous message.
 
Thanks for the response! I added the flow end attribute and cars are spawning now, however I can't seem to extend the end past 3600 seconds. Whenever I try to do so, the calibrators won't spawn cars. What should I do if I want to make the simulation last for longer than an hour?
 
Thanks,
Kaitlyn

On Apr 10, 2024, at 5:10 PM, Kaitlyn Liu <liu.kaitlync@xxxxxxxxx> wrote:

Hi Mirko,
 
Thanks for the response. I added the flow end attribute and cars are spawning now, however I can't seem to extend the end past 3600 seconds. Whenever I try to do so, the calibrators won't spawn cars. What should I do if I want to make the simulation last for longer than an hour?
 
Thanks,
Kaitlyn

On Wed, Apr 10, 2024 at 12:36 PM Mirko Barthauer <m.barthauer@xxxxxxxxxxx> wrote:

Hi Kaitlyn,

 

what happens if you add the flow end attribute? Judging from the source code, I think this can be a problem because the flow duration is undefined / set to 0.

 

Best regards

Mirko

 

 

 

-----Original-Nachricht-----

Betreff: [sumo-user] Calibrators Not Spawning

Datum: 2024-04-10T17:50:37+0200

Von: "Kaitlyn Liu via sumo-user" <sumo-user@xxxxxxxxxxx>

An: "sumo-user@xxxxxxxxxxx" <sumo-user@xxxxxxxxxxx>

 

 

 

Hello,
 
I am currently trying to insert calibrators into my simulation but the calibrators do not seem to be spawning in with both a manual route (ca_3) or a route probe (ca_0-2). I have the following additional file:
 
<additional xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/additional_file.xsd">
    <!-- RouteProbes -->
    <vType id="spawned_car" vClass="passenger" color="1,1,1"/>
    <routeProbe id="rp_0" begin="0.00" period="20.00" edge="28727103#0" file="rp_0.xml"/>
    <routeProbe id="rp_1" begin="0.00" period="20.00" edge="625479007#6" file="rp_1.xml"/>
    <routeProbe id="rp_2" begin="0.00" period="20.00" edge="-292851770#0" file="rp_2.xml"/>
    <routeProbe id="rp_3" begin="0.00" period="20.00" edge="-966308107#4" file="rp_3.xml"/>
   
    <route id="r_0" edges="-966308107#4 -28727096#5 -28727096#1 625479007#0 625479007#1 625479007#3 625479007#6 926031003#0 11956345 926031004#0 -11734068#2" color="red"/>
    <route id="r_1" edges="-966308107#4 11826990#0 11826990#2 11826990#3 265895120#0 28727103#0 28727103#4 11834237#0 11834237#1 625479007#0 625479007#1 625479007#3 625479007#6 11737884#0" color="green"/>
    <route id="r_2" edges="-625851681#2 -28727096#5 -28727096#1 625479007#0 625479007#1 625479007#3 625479007#6 11737884#0" color="green"/>
    <route id="r_3" edges="-966308107#4 -28727096#5 -28727096#1 625479007#0 625479007#1 625479007#3 625479007#6 11737884#0"/>
    <route id="r_4" edges="-625851681#2 -28727096#5 -28727096#1 625479007#0 625479007#1 625479007#3 625479007#6 926031003#0 11956345 926031004#0 -11734068#2" color="blue"/>
    <route id="r_5" edges="-625851681#2 11826990#0 11826990#2 11826990#3 265895120#0 28727103#0 28727103#4 11834237#0 11834237#1 625479007#0 625479007#1 625479007#3 625479007#6 11737884#0" color="blue"/>
    <route id="r_6" edges="-625851681#2 11826990#0 11826990#2 11826990#3 265895120#0 -320455187#3 -24864540#7 -335532208#1 335532207#0 11729090#0 11729090#1 335532206 54964356#0" color="blue"/>
    <route id="r_7" edges="-966308107#4 11826990#0 11826990#2 11826990#3 265895120#0 -320455187#3 -24864540#7 -335532208#1 335532207#0 11729090#0 11729090#1 335532206 54964356#0" color="blue"/>
    <route id="r_8" edges="-11826990#1 11960711#0 -294921088#6 1121515071" color="blue"/>
    <route id="r_9" edges="-11826990#1 625851681#0 625361998#0 625361998#1 625361998#4 625361998#5 292851770#0 292851770#1 292851770#7" color="blue"/>
    <route id="r_10" edges="-11826990#1 -28727096#5 -28727096#1 625479007#0 625479007#1 625479007#3 625479007#6 11737884#0" color="blue"/>
    <route id="r_11" edges="-11826990#1 -28727096#5 -28727096#1 625479007#0 625479007#1 625479007#3 625479007#6 926031003#0 11956345 926031004#0 -11734068#2" color="blue"/>
    <route id="r_12" edges="28727096#2 11826990#0 11826990#2 11826990#3 265895120#0 -320455187#3 -24864540#7 -335532208#1 335532207#0 11729090#0 11729090#1 335532206 54964356#0"/>
    <route id="r_13" edges="28727096#2 625851681#0 625361998#0 625361998#1 625361998#4 625361998#5 292851770#0 292851770#1 292851770#7"/>
    <route id="r_14" edges="28727096#2 11960711#0 -294921088#6 -294921088#4 320948882#0"/>
    <route id="r_15" edges="28727096#2 625851681#0 625361998#0 625361998#1 625361998#4 625361998#5 11837579#0 11837579#3 335532207#0 11729090#0 11729090#1 335532206 54964356#0"/>

    <!-- Calibrators -->
    <calibrator id="ca_1" edge="625479007#6" pos="0.00" routeProbe="rp_1">
        <flow begin="0.00" departPos="free" departSpeed="max" speed="27.80" vehsPerHour="600.00"/>
    </calibrator>
    <calibrator id="ca_0" edge="28727103#0" pos="0.00" routeProbe="rp_0">
        <flow begin="0.00" departPos="free" departSpeed="max" speed="27.80" vehsPerHour="1000.00"/>
    </calibrator>
    <calibrator id="ca_2" edge="-292851770#0" pos="0.00" routeProbe="rp_2">
        <flow begin="0.00" departPos="free" departSpeed="max" speed="27.80" vehsPerHour="600.00"/>
    </calibrator>
    <calibrator id="ca_3" edge="-966308107#4" pos="0.00" output="ca_3.xml">
        <flow begin="0.00" departPos="free" departSpeed="max" speed="27.80" route="r_0" vehsPerHour="100.00" period="5"/>
    </calibrator>

    <!-- Detectors -->
    <laneAreaDetector id="0" lane="28727096#2_0" pos="70.00" length="49.00" tl="GS_105097632" file="LAD_output"/>
    <laneAreaDetector id="1" lane="28727096#2_1" pos="70.00" length="49.00" tl="GS_105097632" file="LAD_output"/>
    <laneAreaDetector id="2" lane="-625851681#2_0" pos="80.00" length="49.00" tl="GS_105097632" file="LAD_output"/>
    <laneAreaDetector id="3" lane="-625851681#2_1" pos="80.00" length="49.00" tl="GS_105097632" file="LAD_output"/>
    <laneAreaDetector id="4" lane="-966308107#4_0" pos="285.00" length="49.00" tl="GS_105097632" file="LAD_output"/>
    <laneAreaDetector id="5" lane="-11826990#1_0" pos="5.00" length="40.00" tl="GS_105097632" file="LAD_output"/>
</additional>
 
These are my configs for traci: 
 traci.start(
        [
            sumoBinary,
            '--net-file', 'simulation/network.net.xml',
            '--route-files', 'simulation/passenger.trips.xml',
            '--delay', '1000',
            '--gui-settings-file', 'simulation/view.xml',
            '--additional-files', 'simulation/additional.add.xml',
            '--max-depart-delay', '20',
            '--extrapolate-departpos',
            '--start'
        ])
 
I was wondering if anyone has any idea what could be going wrong.
 
Thanks,
Kaitlyn

 



Back to the top