[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[
List Home]
Re: [ptp-user] PTP and modules
|
On Wednesday, May 02, 2012 11:19:33 Christoph Pospiech wrote:
> 1. When executing all four commands as above, I am getting the following.
> di69job@i01r12s30:~> cat output.txt
> bash: module: command not found
> bash: module: command not found
> bash: module: command not found
>
> when I leave the bash and return to the bash that was started at login,
> "module help" produces an expected output, but the "module -t ..." produce
> the strange error message 'ERROR: invalid command name "Jan."'
> So I did the following command.
> echo "repeating the commands without option -t" >> output.txt
> And then repeated "module list" and "module avail" without the -t option.
>
> I am attaching the resulting file below.
>
> Does this help ?
> I will repeat the same on the first system ("jugene") and add another post
> about that soon.
On "jugene", the extra "bash" had no adverse effect, but the rest was just the
same.
Again, I am appending the output.txt file from this experiment.
--
Mit freundlichen Grüßen / Kind regards
Dr. Christoph Pospiech
High Performance & Parallel Computing
Phone: +49-351 86269826
Mobile: +49-171-765 5871
E-Mail: christoph.pospiech@xxxxxxxxxx
-------------------------------------------------------------------------------------------------------------------------------------------
IBM Deutschland GmbH / Vorsitzender des Aufsichtsrats: Martin Jetter
Geschäftsführung: Martina Koederitz (Vorsitzende), Reinhard Reschke, Dieter
Scholz, Gregor Pillen, Joachim Heel, Christian Noll
Sitz der Gesellschaft: Ehningen / Registergericht: Amtsgericht Stuttgart, HRB
14562 / WEEE-Reg.-Nr. DE 99369940
Modules Release Tcl 3.1.6 ($RCSfile: modulecmd.tcl,v $ $Revision: 1.121 $)
Copyright GNU GPL v2 1991
Usage: module [ command ]
Commands:
list [switches] modulefile [modulefile ...]
display | show modulefile [modulefile ...]
add | load modulefile [modulefile ...]
purge | rm | unload modulefile [modulefile ...]
reload modulefile [modulefile ...]
switch | swap [oldmodulefile] newmodulefile
avail [switches] [modulefile [modulefile ...]]
whatis [modulefile [modulefile ...]]
help [modulefile [modulefile ...]]
path modulefile
paths modulefile
initlist modulefile
initadd modulefile
initrm modulefile
initclear modulefile
initprepend modulefile
use dir [dir ...]
unuse dir [dir ...]
source scriptfile
apropos | keyword | search string
Switches:
-t terse format avail and list
-l long format avail and list
ERROR: invalid command name "Jan."
ERROR: invalid command name "Jan."
repeating the commands without option -t
Currently Loaded Modulefiles:
------------ /bgsys/local/modulefiles/TOOLS ------------
------------ /bgsys/local/modulefiles/SCIENTIFIC ------------
gpaw-setup/0.5.3574 namd/2.7(default)
gpaw-setup/0.6.6300 namd/2.7b1
gpaw/0.6.4946(default) namd/2.8
gpaw/0.7.2 tremolo/v1.6-basic(default)
namd/2.6
------------ /bgsys/local/modulefiles/MISC ------------
tbb/3.0.3
------------ /bgsys/local/modulefiles/MATH ------------
arpack/2.1(default) mumps/4.7.3_g
arpack/2.1_450d mumps/4.8.1(default)
arpack/2.1_g mumps/4.8.1_450d
blacs/1.1(default) mumps/4.9.2
blacs/1.1_450d mumps/4.9.2_450d
blacs/1.1_g mumps/4.9.2_g
fftw/3.1.2 parmetis/3.1(default)
fftw/3.2.2 parmetis/3.1_450d
fftw/3.2.2_450d parmetis/3.1_g
fftw/3.3 parmetis/3.2.0
fftw/bglfftwgel-2.1.5-openmp parmetis/3.2.0_450d
fftw/v2.1.5 parmetis/3.2.0_g
fftw/v2.1.5_450d petsc/2.3.3_O0g
gmp/4.2 petsc/2.3.3_O3
gmp/5.0.1(default) petsc/2.3.3_O3g
gsl/1.11 petsc/2.3.3_complex_O3g
gsl/1.11_g petsc/3.1-p2_basic_450d
gsl/1.13 petsc/3.1-p2_basic_O3
gsl/1.13_g petsc/3.1-p2_basic_Og
gsl/1.14(default) petsc/3.1-p2_basic_complex_O3
gsl/1.14_450d petsc/3.2-p6_basic_O3
gsl/1.14_g scalapack/1.8
hypre/2.0(default) scalapack/1.8_450d
hypre/2.0_450d scalapack/1.8_g
hypre/2.0_g scalapack/1.8_sca
hypre/2.6.0b scalapack/2.0.1
hypre/2.6.0b_450d scalapack/2.0.1_450d
hypre/2.6.0b_g sprng/1.0
lapack/3.0 sprng/1.0_450d
lapack/3.0_450d sprng/1.0_g
lapack/3.0_g sprng/2.0(default)
lapack/3.3.0 sprng/2.0_450d
lapack/3.3.0_450d sprng/2.0_g
mumps/4.10.0 sundials/2.3.0(default)
mumps/4.10.0_450d sundials/2.3.0_450d
mumps/4.10.0_g sundials/2.3.0_g
mumps/4.7.3 sundials/2.4.0
mumps/4.7.3_450d sundials/2.4.0_g
------------ /bgsys/local/modulefiles/IO ------------
------------ /bgsys/local/modulefiles/COMPILER ------------
gcc/4.3.2(default) xlf/11.1
------------ /usr/local/modulefiles/COMPILER ------------
bison/2.3 cmake/2.8.1(default)
------------ /usr/local/modulefiles/MATH ------------
fftw/3.1.2-front fftw/3.1.2_float-front numpy/1.2.1(default)
------------ /usr/local/modulefiles/SCIENTIFIC ------------
gromacs/4.0.7(default) gromacs/4.5.3 lammps/09Nov11
gromacs/4.0b lammps/07Dec10(default)
------------ /usr/local/modulefiles/IO ------------
hdf5/1.8.4_450(default) sionlib/1.1.9 sionlib/1.3.2
hdf5/1.8.4_450d sionlib/1.2.2(default) sionlib/1.3.2a
hdf5/1.8.4_ppc sionlib/1.3.1 sionlib/1.3.4
------------ /usr/local/modulefiles/TOOLS ------------
UNITE/1.1/1.0 lroot/1.1 subversion/1.5.5(default)
doxygen/1.5.7 ltools/1.1 subversion/1.6.5
git/1.7.7.3 scalasca/deprecated
ihpct/2.2.2 subversion/1.5.1
------------ /usr/local/modulefiles/MISC ------------
deisa qt/4.6.2-32 qt/4.6.2-64 tex/pgf-2.00