| Re: [cdt-dev] 'continue' executed via gdb.post_event() breaks run control inside Eclipse |
|
Hi Jonah, Sure, I’ll leave the GDB traces for Windows and Linux below. But please keep in mind that reproducing the problem is fairly easy and there’s no need for any complicated setups. Ignore my complicated setup from Windows. :-) Thanks, Adrian ------------------ GDB traces – Windows host ------------------ 174,573 (gdb) 176,138 3-gdb-version 176,145 ~"GNU gdb (GNU Tools for Arm Embedded Processors 9-2019-q4-major) 8.3.0.20190709-git\n" 176,145 ~"Copyright (C) 2019 Free Software Foundation, Inc.\n" 176,145 ~"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is fre\ e software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitt\ ed by law." 176,145 ~"\nType \"show copying\" and \"show warranty\" for details.\n" 176,145 ~"This GDB was configured as \"--host=i686-w64-mingw32 --target=arm-none-eabi\".\n" 176,145 ~"Type \"show configuration\" for configuration details.\n" 176,145 ~"For bug reporting instructions, please see:\n" 176,145 ~"<http://www.gnu.org/software/gdb/bugs/>.\n" 176,145 ~"Find the GDB manual and other documentation resources online at:\n <http://www.gnu.org/\ software/gdb/documentation/>." 176,145 ~"\n\n" 176,146 ~"For help, type \"help\".\n" 176,146 ~"Type \"apropos word\" to search for commands related to \"word\".\n" 176,146 3^done 176,146 (gdb) 176,147 4-environment-cd xxx/frdmk\ w36_demo_apps_bubble 176,158 4^done 176,158 (gdb) 176,159 5-gdb-set breakpoint pending on 176,170 5^done 176,170 (gdb) 176,171 6-gdb-set detach-on-fork on 176,180 6^done 176,180 (gdb) 176,181 7-enable-pretty-printing 176,191 7^done 176,191 (gdb) 176,192 8-gdb-set python print-stack none 176,201 8^done 176,201 (gdb) 176,202 9-gdb-set print object on 176,212 9^done 176,212 (gdb) 176,213 10-gdb-set print sevenbit-strings on 176,222 10^done 176,222 (gdb) 176,222 11-gdb-set host-charset UTF-8 176,233 11^done 176,233 (gdb) 176,234 12-gdb-set target-charset WINDOWS-1252 176,243 12^done 176,243 (gdb) 176,244 13-gdb-set target-wide-charset UTF-16 176,254 13^done 176,254 (gdb) 176,254 14-gdb-set dprintf-style call 176,264 14^done 176,264 (gdb) 176,265 15-gdb-set target-async off 176,274 15^done 176,274 (gdb) 176,275 16-gdb-set record full stop-at-limit off 176,284 16^done 176,284 (gdb) 176,285 17-gdb-set auto-solib-add on 176,294 17^done 176,294 (gdb) 176,299 18-file-exec-and-symbols --thread-group i1 xxx/frdmkw36_demo_apps_bubble/Debug/frdmkw36_demo_apps_bubble.axf 176,317 18^done 176,317 (gdb) 176,318 19-interpreter-exec console "set remotetimeout 60000" 176,327 =cmd-param-changed,param="remotetimeout",value="60000" 176,327 19^done 176,327 (gdb) 176,334 20-target-select extended-remote | xxx_custom_stub_invoked_xxx 177,765 =thread-group-started,id="i1",pid="42000" 177,766 =thread-created,id="1",group-id="i1" 177,827 ~"ResetISR () at ../startup/startup_mkw36z4.c:288\n" 177,827 ~"288\tvoid ResetISR(void) {\n" 177,827 *stopped,frame={addr="0x00000124",func="ResetISR",args=[],file="../startup/startup_mkw36z4.c\ ",fullname="xxx\\frdmkw36_demo\ _apps_bubble\\startup\\startup_mkw36z4.c",line="288",arch="armv6s-m"},thread-id="1",stopped-threads=\ "all" 177,844 20^connected 177,844 (gdb) 177,845 21-interpreter-exec console "set mem inaccessible-by-default off" 177,854 =cmd-param-changed,param="mem inaccessible-by-default",value="off" 177,854 21^done 177,854 (gdb) 177,855 22-interpreter-exec console "mon ondisconnect cont" 177,876 22^done 177,876 (gdb) 177,877 23-interpreter-exec console "set arm force-mode thumb" 177,886 =cmd-param-changed,param="arm force-mode",value="thumb" 177,886 23^done 177,886 (gdb) 177,887 24-interpreter-exec console "set remote hardware-breakpoint-limit 4" 177,897 =cmd-param-changed,param="remote hardware-breakpoint-limit",value="4" 177,897 24^done 177,897 (gdb) 177,898 25set range-stepping on 177,907 &"set range-stepping on\n" 177,918 25^done 177,918 (gdb) 177,919 26-interpreter-exec console "mon semihost enable" 177,939 26^done 177,940 (gdb) 177,940 27-target-download 177,951 27+download,{section=".text",section-size="28328",total-size="180010"} 177,951 27+download,{section=".text",section-sent="16000",section-size="28328",total-sent="16000",to\ tal-size="180010"} 177,952 27+download,{section=".data",section-size="112",total-size="180010"} 178,415 28-list-thread-groups 178,554 27^done,address="0x124",load-size="28440",transfer-rate="397760",write-rate="9480" 178,554 (gdb) 178,555 29-interpreter-exec console "mon SWO datasource" 178,556 28^done,groups=[{id="i1",type="process",pid="42000",executable="xxx\\frdmkw36_demo_apps_bubble\\Debug\\frdmkw36_demo_apps_\ bubble.axf"}] 178,556 (gdb) 178,563 30-list-thread-groups i1 178,567 29^done 178,567 (gdb) 178,580 30^done,threads=[{id="1",target-id="Thread 1",details="Runnable",frame={level="0",addr="0x00\ 000124",func="ResetISR",args=[],file="../startup/startup_mkw36z4.c",fullname="xxx\\frdmkw36_demo_apps_bubble\\startup\\startup_mkw\ 36z4.c",line="288",arch="armv6s-m"},state="stopped"}] 178,580 (gdb) 178,587 31-gdb-show --thread-group i1 language 178,588 32-stack-info-depth --thread 1 11 178,591 31^done,value="auto" 178,591 (gdb) 178,592 32^done,depth="1" 178,592 (gdb) 178,592 33-gdb-set --thread-group i1 language c 178,603 33^done 178,603 (gdb) 178,604 34-interpreter-exec --thread-group i1 console "p/x (char)-1" 178,614 ~"$1 = 0xff\n" 178,614 34^done 178,614 (gdb) 178,615 35-data-evaluate-_expression_ --thread-group i1 "sizeof (void*)" 178,624 35^done,value="4" 178,625 (gdb) 178,625 36-gdb-set --thread-group i1 language auto 178,636 36^done 178,636 (gdb) 178,636 37-interpreter-exec --thread-group i1 console "show endian" 178,646 ~"The target endianness is set automatically (currently little endian)\n" 178,646 37^done 178,646 (gdb) 178,768 38-break-insert -t -h -f main 178,796 38^done,bkpt={number="1",type="hw breakpoint",disp="del",enabled="y",addr="0x000007c2",func=\ "main",file="../source/bubble.c",fullname="xxx\\frdmkw36_demo_apps_bubble\\source\\bubble.c",line="163",thread-groups=["i1"],times\ ="0",original-location="main"} 178,796 (gdb) 178,802 39-exec-continue --thread-group i1 178,806 39^running 178,806 *running,thread-id="all" 178,807 (gdb) 178,915 =breakpoint-modified,bkpt={number="1",type="hw breakpoint",disp="del",enabled="y",addr="0x00\ 0007c2",func="main",file="../source/bubble.c",fullname="xxx\\frdmkw36_demo_apps_bubble\\source\\bubble.c",line="163",thread-groups\ =["i1"],times="1",original-location="main"} 178,937 ~"\n" 178,937 ~"Temporary breakpoint 1, main () at ../source/bubble.c:163\n" 178,938 ~"163\t uint8_t sensorRange = 0;\n" 178,938 *stopped,reason="breakpoint-hit",disp="del",bkptno="1",frame={addr="0x000007c2",func="main",\ args=[],file="../source/bubble.c",fullname="xxx\\frdmkw36_demo_apps_bubble\\source\\bubble.c",line="163",arch="armv6s-m"},thread-i\ d="1",stopped-threads="all" 178,938 =breakpoint-deleted,id="1" 178,938 (gdb) 180,464 40-stack-select-frame --thread 1 0 180,470 40^done 180,470 (gdb) 180,482 41-stack-info-depth --thread 1 2 180,492 41^done,depth="1" 180,492 (gdb) 181,336 42-data-list-register-names --thread-group i1 181,346 42^done,register-names=["r0","r1","r2","r3","r4","r5","r6","r7","r8","r9","r10","r11","r12",\ "sp","lr","pc","","","","","","","","","","xpsr","","","","","","","","","","","","","","","","","",\ "","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","","\ ","","","","","","","","","","","","","","","msp","psp","control","primask","cycles"] 181,347 (gdb) 181,349 43-data-list-register-values --thread 1 --frame 0 x 25 181,389 43^done,register-values=[{number="25",value="0x61000000"}] 181,389 (gdb) 181,591 44-thread-info 1 181,599 44^done,threads=[{id="1",target-id="Thread 1",details=" ",frame={level="0",addr="0x000007c2"\ ,func="main",args=[],file="../source/bubble.c",fullname="xxx\\frdmkw36_demo_apps_bubble\\source\\bubble.c",line="163",arch="armv6s\ -m"},state="stopped"}] 181,600 (gdb) 182,965 45-stack-select-frame --thread 1 0 182,975 45^done 182,975 (gdb) 183,156 46-stack-select-frame --thread 1 0 183,163 46^done 183,163 (gdb) //***** Executing the python script using Debugger Console *****// 191,292 47-interpreter-exec console "source post_event.py" 191,297 47^done 191,298 (gdb) //***** Resuming from Eclipse. Target app now stopped in 'main'. *****// 202,900 48-exec-continue --thread 1 202,908 48^running 202,908 *running,thread-id="all" 202,908 (gdb) 202,956 49-thread-select 1 //***** Suspending from Eclipse. 'continue' gets executed from the script and Eclipse shows app as running (expected) *****// 212,656 ~"\nProgram" 212,657 ~" received signal SIGINT, Interrupt.\n" 212,707 ~"0x00001d9c in I2C_MasterTransferBlocking (base=0x40066000, xfer=0x2000bfbc) at ../drivers/\ fsl_i2c.c:964\n" 212,707 ~"964\t while (!(base->S & kI2C_IntPendingFlag))\n" 212,707 *stopped,reason="signal-received",signal-name="SIGINT",signal-meaning="Interrupt",frame={add\ r="0x00001d9c",func="I2C_MasterTransferBlocking",args=[{name="base",value="0x40066000"},{name="xfer"\ ,value="0x2000bfbc"}],file="../drivers/fsl_i2c.c",fullname="xxx\\frdmkw36_demo_apps_bubble\\drivers\\fsl_i2c.c",line="964",arch="a\ rmv6s-m"},thread-id="1",stopped-threads="all" 212,707 (gdb) 212,708 ~"Executing <continue>\n" 212,708 *running,thread-id="all" 212,710 50-data-list-register-values --thread 1 --frame 0 x 25 212,719 49^error,msg="Cannot execute this command while the target is running.\nUse the \"interrupt\\ " command to stop the target\nand then try again." 212,720 (gdb) 212,720 50^error,msg="Selected thread is running." 212,720 (gdb) //***** Suspend again. Now we should see target really suspended. However, 'interrupt failed' error is shown. *****// 222,474 &"Quit\n" 222,975 51-interpreter-exec --thread-group i1 console kill 222,975 &"Quit\n" 222,976 ~"Kill the program being debugged? (y or n) [answered Y; input not from terminal]\n" 222,976 &"Cannot execute this command while the target is running.\n" 222,976 &"Use the \"interrupt\" command to stop the target\n" 222,976 &"and then try again.\n" 222,976 51^error,msg="Cannot execute this command while the target is running.\nUse the \"interrupt\\ " command to stop the target\nand then try again." 222,976 (gdb) //***** Terminate executed. Error is shown. Debug session not terminated. *****// 236,776 52-thread-select 1 236,777 52^error,msg="Cannot execute this command while the target is running.\nUse the \"interrupt\\ " command to stop the target\nand then try again." 236,777 (gdb) 238,277 &"Quit\n" 238,777 53-interpreter-exec --thread-group i1 console kill 238,777 &"Quit\n" 238,778 ~"Kill the program being debugged? (y or n) [answered Y; input not from terminal]\n" 238,779 &"Cannot execute this command while the target is running.\n" 238,779 &"Use the \"interrupt\" command to stop the target\n" 238,779 &"and then try again.\n" 238,779 53^error,msg="Cannot execute this command while the target is running.\nUse the \"interrupt\\ " command to stop the target\nand then try again." 238,779 (gdb) ------------------ GDB traces – Linux host ------------------ 300,506 2-gdb-version 300,508 ~"GNU gdb (Ubuntu 8.1-0ubuntu3) 8.1.0.20180409-git\n" 300,511 ~"Copyright (C) 2018 Free Software Foundation, Inc.\n" 300,511 ~"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is fre\ e software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitt\ ed by law. Type \"show copying\"\nand \"show warranty\" for details.\n" 300,511 ~"This GDB was configured as \"x86_64-linux-gnu\".\nType \"show configuration\" for configur\ ation details." 300,511 ~"\nFor bug reporting instructions, please see:\n" 300,511 ~"<http://www.gnu.org/software/gdb/bugs/>.\n" 300,511 ~"Find the GDB manual and other documentation resources online at:\n<http://www.gnu.org/soft\ ware/gdb/documentation/>.\n" 300,511 ~"For help, type \"help\".\n" 300,511 ~"Type \"apropos word\" to search for commands related to \"word\".\n" 300,511 2^done 300,512 3-list-thread-groups 300,512 (gdb) 300,512 3^done,groups=[{id="i1",type="process"}] 300,512 (gdb) 300,512 4-environment-cd xxx/X 300,518 4^done 300,518 (gdb) 300,518 5-gdb-set breakpoint pending on 300,518 5^done 300,518 (gdb) 300,519 6-gdb-set detach-on-fork on 300,519 6^done 300,519 (gdb) 300,519 7-enable-pretty-printing 300,519 7^done 300,519 (gdb) 300,519 8-gdb-set python print-stack none 300,519 8^done 300,519 (gdb) 300,519 9-gdb-set print object on 300,519 9^done 300,519 (gdb) 300,519 10-gdb-set print sevenbit-strings on 300,519 10^done 300,519 (gdb) 300,520 11-gdb-set host-charset UTF-8 300,520 11^done 300,520 (gdb) 300,520 12-gdb-set target-charset UTF-8 300,520 12^done 300,520 (gdb) 300,520 13-gdb-set target-wide-charset UTF-32 300,520 13^done 300,520 (gdb) 300,523 14-gdb-set dprintf-style call 300,523 14^done 300,523 (gdb) 300,524 15source .gdbinit 300,524 &"source .gdbinit\n" 300,524 &".gdbinit: No such file or directory.\n" 300,524 15^error,msg=".gdbinit: No such file or directory." 300,524 (gdb) 300,524 16-gdb-set target-async on 300,524 16^done 300,524 (gdb) 300,524 17-gdb-set record full stop-at-limit off 300,524 17^done 300,524 (gdb) 300,525 18-gdb-set auto-solib-add on 300,525 18^done 300,525 (gdb) 300,528 19-file-exec-and-symbols --thread-group i1 xxx/X/Debug/X 300,530 19^done 300,530 (gdb) 300,530 20-gdb-show --thread-group i1 language 300,531 20^done,value="auto" 300,531 (gdb) 300,531 21-gdb-set --thread-group i1 language c 300,531 21^done 300,531 (gdb) 300,531 22-interpreter-exec --thread-group i1 console "p/x (char)-1" 300,531 ~"$1 = 0xff\n" 300,531 22^done 300,531 (gdb) 300,531 23-data-evaluate-_expression_ --thread-group i1 "sizeof (void*)" 300,532 23^done,value="8" 300,532 (gdb) 300,532 24-gdb-set --thread-group i1 language auto 300,532 24^done 300,532 (gdb) 300,532 25-interpreter-exec --thread-group i1 console "show endian" 300,532 ~"The target endianness is set automatically (currently little endian)\n" 300,533 25^done 300,533 (gdb) 300,533 26-break-insert -t -f main 300,533 26^done,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x0000000000400501",\ func="main",file="../src/X.c",fullname="xxx/X/src/X.c",line="15",thread-\ groups=["i1"],times="0",original-location="main"} 300,533 (gdb) 300,534 27-inferior-tty-set --thread-group i1 /dev/pts/22 300,534 27^done 300,534 (gdb) 300,535 28-exec-run --thread-group i1 300,537 =thread-group-started,id="i1",pid="29357" 300,537 =thread-created,id="1",group-id="i1" 300,539 29-list-thread-groups 300,570 =library-loaded,id="/lib64/ld-linux-x86-64.so.2",target-name="/lib64/ld-linux-x86-64.so.2",h\ ost-name="/lib64/ld-linux-x86-64.so.2",symbols-loaded="0",thread-group="i1",ranges=[{from="0x00007ff\ ff7dd5f10",to="0x00007ffff7df4b20"}] 300,584 28^running 300,584 *running,thread-id="all" 300,584 (gdb) 300,584 29^done,groups=[{id="i1",type="process",pid="29357",executable="xxx/X/Debug/X",cores=["3"]}] 300,584 (gdb) 300,587 =library-loaded,id="/lib/x86_64-linux-gnu/libc.so.6",target-name="/lib/x86_64-linux-gnu/libc\ .so.6",host-name="/lib/x86_64-linux-gnu/libc.so.6",symbols-loaded="0",thread-group="i1",ranges=[{fro\ m="0x00007ffff7a052d0",to="0x00007ffff7b7dc3c"}] 300,755 =breakpoint-modified,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x00000\ 00000400501",func="main",file="../src/X.c",fullname="xxx/X/src/X.c",line\ ="15",thread-groups=["i1"],times="1",original-location="main"} 300,755 ~"\n" 300,755 ~"Temporary breakpoint 1, main () at ../src/X.c:15\n" 300,755 ~"15\t\tputs(\"!!!Hello World!!!\"); /* prints !!!Hello World!!! */\n" 300,755 *stopped,reason="breakpoint-hit",disp="del",bkptno="1",frame={addr="0x0000000000400501",func\ ="main",args=[],file="../src/X.c",fullname="xxx/X/src/X.c",line="15"},th\ read-id="1",stopped-threads="all",core="3" 300,755 =breakpoint-deleted,id="1" 300,760 30-list-thread-groups 300,760 30^done,groups=[{id="i1",type="process",pid="29357",executable="xxx/X/Debug/X",cores=["3"]}] 300,760 (gdb) 300,933 31-list-thread-groups i1 300,934 31^done,threads=[{id="1",target-id="process 29357",name="X",frame={level="0",addr="0x0000000\ 000400501",func="main",args=[],file="../src/X.c",fullname="xxx/X/src/X.c\ ",line="15"},state="stopped",core="3"}] 300,934 (gdb) 300,937 32-stack-info-depth --thread 1 11 300,938 32^done,depth="1" 300,938 (gdb) 300,952 33-stack-select-frame --thread 1 0 300,952 33^done 300,952 (gdb) 300,980 34-list-thread-groups 300,980 35-thread-info 1 300,980 34^done,groups=[{id="i1",type="process",pid="29357",executable="xxx/X/Debug/X",cores=["3"]}] 300,980 (gdb) 300,980 35^done,threads=[{id="1",target-id="process 29357",name="X",frame={level="0",addr="0x0000000\ 000400501",func="main",args=[],file="../src/X.c",fullname="xxx/X/src/X.c\ ",line="15"},state="stopped",core="3"}] 300,980 (gdb) 301,016 36-stack-list-locals --thread 1 --frame 0 1 301,016 36^done,locals=[] 301,016 (gdb) //***** I don't see the execution of the python script being logged here. *****//
//***** But I guess it has something to do with the separate channel used by the Debugger Console. *****// //***** Anyway... Resuming from 'main' *****// 350,925 37-exec-continue --thread 1 350,925 37^running 350,925 *running,thread-id="all" 350,925 (gdb) 350,948 38-thread-select 1 350,948 38^done,new-thread-id="1" 350,948 (gdb) //***** Suspending from Eclipse. 'continue' gets executed from the script. *****// //***** Compared to the behavior on Windows, I now see some empty stack frames in Debug view. We should see the app running in Eclipse. *****// 358,295 39-exec-interrupt --thread 1 358,296 39^done 358,296 (gdb) 358,296 ~"\nProgram" 358,296 ~" received signal SIGINT, Interrupt.\n" 358,296 ~"main () at ../src/X.c:16\n" 358,296 ~"16\t\twhile (1) { };\n" 358,296 *stopped,reason="signal-received",signal-name="SIGINT",signal-meaning="Interrupt",frame={add\ r="0x000000000040050b",func="main",args=[],file="../src/X.c",fullname="xxx/X/src/X.c",line="16"},thread-id="1",stopped-threads="all",core="3" 358,296 ~"Executing <continue>\n" 358,296 ^running 358,296 *running,thread-id="all" 358,300 40-stack-info-depth --thread 1 11 358,300 40^error,msg="Selected thread is running." 358,300 (gdb) 358,300 41-stack-list-frames --thread 1 0 10 358,300 41^error,msg="Selected thread is running." 358,300 (gdb) 358,304 42-stack-select-frame --thread 1 0 358,305 42^error,msg="Selected thread is running." 358,305 (gdb) 358,334 43-stack-info-depth --thread 1 2 358,334 43^error,msg="Selected thread is running." 358,335 (gdb) 358,335 44-stack-list-frames --thread 1 0 1 358,335 44^error,msg="Selected thread is running." 358,335 (gdb) 358,379 45-list-thread-groups 358,379 46-thread-info 1 358,381 45^done,groups=[{id="i1",type="process",pid="29357",executable="xxx/X/Debug/X",cores=["1"]}] 358,381 (gdb) 358,381 46^done,threads=[{id="1",target-id="process 29357",name="X",state="running",core="1"}] 358,381 (gdb) 358,382 47-stack-info-depth --thread 1 5 358,382 48-stack-list-locals --thread 1 --frame 0 1 358,382 47^error,msg="Selected thread is running." 358,383 (gdb) 358,383 48^error,msg="Selected thread is running." 358,383 (gdb) 358,383 49-stack-list-frames --thread 1 0 4 358,383 49^error,msg="Selected thread is running." 358,383 50-stack-list-locals --thread 1 --frame 0 0 358,383 (gdb) 358,383 50^error,msg="Selected thread is running." 358,383 (gdb) 358,386 51-stack-list-frames --thread 1 358,386 51^error,msg="Selected thread is running." 358,386 (gdb) 358,386 52-stack-list-frames --thread 1 1 1 358,386 53-stack-list-frames --thread 1 2 2 358,386 54-stack-list-frames --thread 1 3 3 358,386 55-stack-list-frames --thread 1 4 4 358,386 52^error,msg="Selected thread is running." 358,386 (gdb) 358,386 53^error,msg="Selected thread is running." 358,386 (gdb) 358,386 54^error,msg="Selected thread is running." 358,386 (gdb) 358,386 55^error,msg="Selected thread is running." 358,386 (gdb) //***** Suspending again is not possible. Eclipse 'sees' the app as suspended, even though it is really executing. *****// //***** Attempting a Terminate now. Surprisingly, debug session is terminated without any errors popping out. *****// 379,674 56-interpreter-exec --thread-group i1 console kill 379,674 ~"Kill the program being debugged? (y or n) [answered Y; input not from terminal]\n" 379,674 =thread-exited,id="1",group-id="i1" 379,674 =thread-group-exited,id="i1" 379,674 56^done 379,674 (gdb) 379,677 57-list-thread-groups i1 379,678 57^done,threads=[] 379,678 (gdb) 379,682 58-list-thread-groups 379,682 58^done,groups=[{id="i1",type="process",executable="xxx/X/Debug/\ X"}] 379,682 (gdb) 379,694 59-list-thread-groups 379,694 59^done,groups=[{id="i1",type="process",executable="xxx/X/Debug/\ X"}] 379,694 (gdb) 380,175 60-gdb-exit 380,175 60^exit From: cdt-dev-bounces@xxxxxxxxxxx <cdt-dev-bounces@xxxxxxxxxxx>
On Behalf Of Jonah Graham Caution: EXT Email
Hi Adrian, This is an interesting use case. Thanks for posting it. The first step to understand why CDT goes wrong is to examine the MI log in this case. Can you share the MI log? Thanks, Jonah On Thu., Apr. 23, 2020, 11:55 Adrian Oltean wrote:
|