[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[
List Home]
Green vs. black lines in Topology? (Re: [aperi-dev] Discovering virtual N_Port_IDs)
|
Hi,
It seems the Topology Viewer uses Green lines between host and
switch ports, to represent a current/live connections, and black lines
to represent other (previous?) connections.
What is the intended purpose of this visualization, and is there a
way to configure this behavior?
Thanks,
Robert
>>> On 9/13/2008 at 9:19 AM, in message
<48CB85A5020000CF00051A7A@xxxxxxxxxxxxxxxxxxxxxxx>, "Robert Wipfel"
<rawipfel@xxxxxxxxxx> wrote:
> Hi,
>
> Just thought we'd share; a development SAN is running VMs with
> virtual N_Port_IDs, and it seems Aperi was able to discover the virtual
> WWNN and WWPN [1] and map to the VM hosts that had them
> (dynamically) bound, via SNMP from the Fibre Channel switch; relative
> to discovery on VM hosts (running the Aperi agent) with SAN HBAs.
> No code changes required to shipping 0.4 Aperi codebase (which also
> supports running the Aperi agent inside a Xen- based VM).
>
> Thanks,
> Robert
>
> [1] http://en.wikipedia.org/wiki/World_Wide_Name
>
> P.S.
>
> Example WWWN:WWPN for VM 1:
> C0001B0000000001:C0001B1000000001
>
> Emulex driver implementation (SLES10 SP2):
> /etc/modprobe.conf.local
> options lpfc lpfc_enable_npiv=1
>
> To bind a virtual port:
> (See also /etc/xen/scripts/block- npiv)
> echo $wwpn:$wwnn > /sys/class/scsi_host/$host/vport_create
>
> E.g. for VM 1
> echo "C0001B1000000001:C0001B0000000001" >
> /sys/class/scsi_host/host1/vport_create
>
>
> _______________________________________________
> aperi- dev mailing list
> aperi- dev@xxxxxxxxxxx
> https://dev.eclipse.org/mailman/listinfo/aperi- dev