Home » Newcomers » Newcomers » Newbie to Eclipse...(probably an easy question?)
Newbie to Eclipse... [message #788301] |
Wed, 01 February 2012 16:09 |
Matthew Millar Messages: 2 Registered: February 2012 |
Junior Member |
|
|
For the hell of it, I decided recently to start learning a bit about programming for Android. It seems fun, and increasingly useful as of late. I am also pretty decent at coding, so I figured I would give it a go.
I have never messed with virtual devices though before, and am at a loss here. It seems every time I compile and launch my project, I have to re-launch the emulator (that takes forever and a half to load mind you)? I did some searching and found ways to SPEED UP the launch, but it still takes longer than is convenient to preview my project.
I saw that setting the run configuration to manual would simply re-install my apk without re-launching the emulator, but the emulator (or virtual device) is not listed under available devices (in fact, nothing is). It only gives me the option to select the launcher and start it anew.
Is there some hidden setting I am missing here? I am assuming this line is the problem (shown in the consol section when running my project with a virtual device all ready open):
[2012-02-01 10:17:33 - Hello World] Automatic Target Mode: Preferred AVD 'DefaultAndroidEmu' is not available. Launching new emulator.
Any help is appreciated, any more information needed, I will provide. Thanks in advance!!
|
|
|
Re: Newbie to Eclipse... [message #788328 is a reply to message #788301] |
Wed, 01 February 2012 16:58 |
|
On 2/1/2012 9:09 AM, Matthew Millar wrote:
> For the hell of it, I decided recently to start learning a bit about
> programming for Android. It seems fun, and increasingly useful as of
> late. I am also pretty decent at coding, so I figured I would give it a go.
> I have never messed with virtual devices though before, and am at a loss
> here. It seems every time I compile and launch my project, I have to
> re-launch the emulator (that takes forever and a half to load mind you)?
> I did some searching and found ways to SPEED UP the launch, but it still
> takes longer than is convenient to preview my project.
> I saw that setting the run configuration to manual would simply
> re-install my apk without re-launching the emulator, but the emulator
> (or virtual device) is not listed under available devices (in fact,
> nothing is). It only gives me the option to select the launcher and
> start it anew.
> Is there some hidden setting I am missing here? I am assuming this line
> is the problem (shown in the consol section when running my project with
> a virtual device all ready open):
> [2012-02-01 10:17:33 - Hello World] Automatic Target Mode: Preferred AVD
> 'DefaultAndroidEmu' is not available. Launching new emulator.
>
> Any help is appreciated, any more information needed, I will provide.
> Thanks in advance!!
Android programming is done using Eclipse, but Eclipse itself has
nothing to do with Android programming. You'll want to find a good
Android support forum. I did some of this about 18 months ago and
continued for about 4 months. If you'd like to read my notes (I list
some good Android support forums), go to
http://www.javahotchocolate.com/tutorials/android.html.
|
|
| |
Re: Newbie to Eclipse... [message #788495 is a reply to message #788355] |
Wed, 01 February 2012 21:58 |
Eric Rizzo Messages: 3070 Registered: July 2009 |
Senior Member |
|
|
On 2/1/12 12:48 PM, Matthew Millar wrote:
> While I understand that, the issue arises with the actual Eclipse
> program. I am not asking for coding help, I am asking for help
> configuring the Eclipse program.
No, you're asking about the Android Emulator and the Android Development
Toolkit (ADT), which are tools provided by Android (Google). They're
built on top of and integrated with Eclipse, but they are not Eclipse.
Eclipse is a general-purpose platform for building applications (mostly
IDEs). The distinction isn't always obvious to newbies, but it is,
nonetheless, important.
There's a "sticky" post at the top of this forum that explains this and
lists some good Android developer support channels.
Eric
|
|
| |
Re: Newbie to Eclipse... [message #791967 is a reply to message #791350] |
Mon, 06 February 2012 13:26 |
|
On 2012.02.05 10:43, Victoria Hulse wrote:
> Also new to eclipse I'm running Mac OS X 10.7.2
>
> I need to program in C for my degree. I've been using Netbeans before. I
> know this is a stupid question, but how do I install the plugins for
> C/C++ on a Mac? I've installed eclipse classic indigo?
> I've gone on youtube but had no luck finding instructions.
>
> Any suggestons?
> Cheers
1) Install Eclipse IDE for C/C++ Development.
2) Read sticky posts at top of this forum.
|
|
| |
Re: Newbie to Eclipse... [message #792916 is a reply to message #792827] |
Tue, 07 February 2012 15:04 |
|
On 2/7/2012 6:14 AM, Hicks incoming wrote:
> which sticky? I have managed to install eclipse classic, I've gone back
> to the eclipse site to get the C/C++ plugin, but which one do I need to
> download for Mac?
Your best bet, if you wish to develop applications in C/C++, is to
download Eclipse IDE for C/C++ Developers--no matter what hardware/OS
platform you use.
|
|
| |
Re: Newbie to Eclipse... [message #794675 is a reply to message #794517] |
Thu, 09 February 2012 15:04 |
|
On 2/9/2012 4:48 AM, Hicks incoming wrote:
> ok when I go to the plug insite for the Eclipse C/C++ IDE Indigo IDE
> SD-1 there are two git repos. cdt - master 8.0.1.zip and cdt - master
> 8.0.0.zip, which one do I need if I'm running Mac OS X 10.7.2?
>
> Cheers
It's possible to endow any existing Eclipse download with additional
features, like the C/C++ plug-ins, but where possible, I try to download
the dedicated Eclipse package. That way, I know I'm getting exactly what
I want. If your main interest is C/C++, I'd download that Eclipse
package directly, then finesse anything else I wanted by means of Help
-> Install New Software.
Someone else may be able to give a more direct answer to your question,
which I dodged (sorry). Plus, I'm not a Macintosh guy.
Best of luck.
|
|
|
Re: Newbie to Eclipse... [message #794683 is a reply to message #794675] |
Thu, 09 February 2012 15:10 |
|
On 2/9/2012 8:04 AM, Russell Bateman wrote:
> On 2/9/2012 4:48 AM, Hicks incoming wrote:
>> ok when I go to the plug insite for the Eclipse C/C++ IDE Indigo IDE
>> SD-1 there are two git repos. cdt - master 8.0.1.zip and cdt - master
>> 8.0.0.zip, which one do I need if I'm running Mac OS X 10.7.2?
>>
>> Cheers
>
> It's possible to endow any existing Eclipse download with additional
> features, like the C/C++ plug-ins, but where possible, I try to download
> the dedicated Eclipse package. That way, I know I'm getting exactly what
> I want. If your main interest is C/C++, I'd download that Eclipse
> package directly, then finesse anything else I wanted by means of Help
> -> Install New Software.
>
> Someone else may be able to give a more direct answer to your question,
> which I dodged (sorry). Plus, I'm not a Macintosh guy.
>
> Best of luck.
Sorry. I didn't fully appreciate your confusion. Whatever you were
trying, try this link instead.
http://eclipse.org/downloads/?osType=macosx
Click on Mac OS X 32 Bit or 64 Bit next to "Eclipse IDE for C/C++
Developers". This will get you what I was talking about in my previous
response. If this is not what you were trying to do, you'll have to wait
for one of the Mac guys that haunt this forum to come along.
|
|
| | | | | | |
Re: Newbie to Eclipse... [message #799257 is a reply to message #799248] |
Wed, 15 February 2012 16:57 |
|
On 2/15/2012 9:50 AM, Hicks incoming wrote:
> what's an emulator? sorry for a stupid question.
He's referring to the mock Android phone by which you test your application.
|
|
| |
Re: Newbie to Eclipse... [message #799288 is a reply to message #799280] |
Wed, 15 February 2012 17:47 |
|
On 2/15/2012 10:36 AM, Hicks incoming wrote:
> Sorry you've lost me now, i'm just trying to install the plug-in's in
> eclipse indigo. I'm new to eclipse too, so if this is something realy
> obvious I should know about, spell it out for me in detail, because I
> must be missing some obvious "know how" here. Cheers
This thread is a little out of control. The original post was looking
for help installing and using ADT, which has nothing to do with Eclipse.
Anthony was replying about the ADT emulator. As you were replying to his
post, I thought you were on about that too.
Best would be just to post a new question and ask what you'd like to
know. It's always precarious to come on top of an existing thread and
steer it toward your own needs.
Please start a new thread and we'll make it all about you!
|
|
| |
Goto Forum:
Current Time: Sat Oct 19 17:08:15 GMT 2024
Powered by FUDForum. Page generated in 0.11863 seconds
|