Eclipse Community Forums: Eclipse Layout Kernel » compartment positions and smarter edge routing

Help

Home

Home » Modeling » Eclipse Layout Kernel » compartment positions and smarter edge routing

Show: Today's Messages :: Show Polls :: Message Navigator

compartment positions and smarter edge routing [message #1772547]

Tue, 12 September 2017 09:15

Mehmet Karaman

Messages: 63
Registered: November 2012
Location: Berlin

Member

Hello,

i've currently implemented a graph which needs nodes with 2 different compartments which contain childs.

Is it possible to define a specific node placing or an orientation of the nodes? Is it possible to shorten long edges?

My layouting result is attached.
- Red lines are my opinion of shortened edge routing
- Blue lines with text are showing the two compartments

The two compartments are layouted horizontally, but i need them in vertical order. The small compartment (Compartment 1) in the right side should be above the other compartment (Compartment 2).

There is also a problem with the edge routing. In this example graph i've discovered 3 easy edges, which could be routed shorter. (3 red lines)

I'm using the layered layouting algorithm with the following properties (only regarding my problem):
LayeredMetaDataProvider.LAYERING_STRATEGY = LayeringStrategy.NETWORK_SIMPLEX

CoreOptions.EDGE_ROUTING = EdgeRouting.ORTHOGONAL
LayeredMetaDataProvider.MERGE_EDGES = true
LayeredMetaDataProvider.MERGE_HIERARCHY_EDGES = true

Thank you in advance.

Attachment: layoutRes.png
(Size: 37.52KB, Downloaded 212 times)

[Updated on: Tue, 12 September 2017 09:19]

Report message to a moderator

Re: compartment positions and smarter edge routing [message #1772557 is a reply to message #1772547]

Tue, 12 September 2017 11:23

Miro Spönemann

Messages: 78
Registered: March 2015
Location: Kiel, Germany

Member

Could the results of Alan's Master Thesis improve the situation here?

http://rtsys.informatik.uni-kiel.de/%7Ebiblio/downloads/theses/alan-mt.pdf

Report message to a moderator

Re: compartment positions and smarter edge routing [message #1772558 is a reply to message #1772557]

Tue, 12 September 2017 11:37

Mehmet Karaman

Messages: 63
Registered: November 2012
Location: Berlin

Member

i will check it, thank you.

Report message to a moderator

Re: compartment positions and smarter edge routing [message #1772628 is a reply to message #1772558]

Wed, 13 September 2017 08:50

Ulf Rueegg

Messages: 26
Registered: February 2010

Junior Member

If I understand your problem correctly, it is not related to crossing minimization as suggested by Miro.

You could set a DOWN layout direction on the node containing the two compartments, although I'm not sure if that's what you want.

Regarding the red lines: Whenever an edge crosses the boundary of a node, internally a port is introduced. Layout is performed bottom-up. Thus, when Compartment 1 is laid out, for instance, the introduced ports have to fixed somehow. The default behavior is that for a left-to-right layout direction ports for "incoming edges" are placed on the WEST side, for "outgoing edges" on the EAST side. That's the reason why the edges take the long detours.

I'm not sure how well your use case can be solved by setting proper layout options. If you can share an elkg or elkt file with your graph's structure, I could give it a try.

Report message to a moderator

Re: compartment positions and smarter edge routing [message #1772683 is a reply to message #1772547]

Wed, 13 September 2017 20:00

Mehmet Karaman

Messages: 63
Registered: November 2012
Location: Berlin

Member

Thank you for your help. Setting the direction explicitly to "down" worked. I've exported the Elk Graph model and attached it. The problem regarding edge routing still remains.

Attachment: Graph.kgraph
(Size: 92.65KB, Downloaded 262 times)

Report message to a moderator

Re: compartment positions and smarter edge routing [message #1773000 is a reply to message #1772683]

Wed, 20 September 2017 06:12

Ulf Rueegg

Messages: 26
Registered: February 2010

Junior Member

This is quite a hard problem.

First of all,
my suggestion regarding the layout direction
is only partly a solution.
You require hierarchical layout (hierarchyHandlung: INCLUDE_CHILDREN)
as you have edges that cross multiple hierarchies.
In that case, only a single (global) layout direction is supported,
i.e. if you set it to RIGHT at the root node, the whole graph will be laid out rightwards.

The issue with the edges originates
from the fact that
edges are routed somewhat simultaneously
to the placement of nodes.

Horizontal red line:
This is an unfortunate
outcome originating
from the interplay
between crossing minimization (phase 3)
and node placement (phase 4).
The crossing minimization
decides the vertical order of the edge segments,
and cannot know about 'edge length',
since the subsequent node placement
phase decides which edge to draw straight

Vertical red lines:
Edges that cross the boundary of a
hierarchical node
are split using dummy ports.
The default behavior to position
these dummy ports is
to place ports
through which edges are "incoming" on the west side,
and "outgoing" ports on the east side.
This results in the elongated 'back-and-forth' edges.

We encountered both points before;
they surely are something that should be improved.
However, I'm not sure that we'll have the
time to look into these issues in the near future.

Report message to a moderator

Previous Topic:	Two-step undo for Sirius
Next Topic:	Eclipse ELK vs GEF

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Mon Dec 30 16:38:13 GMT 2024

.:: Contact :: Home ::.

Breadcrumbs

Sign up to our Newsletter